Philips AC4004AIR QUALITY lights, Colour, Air quality, AC4002AIR QUALITY lights, Auto mode

English 11

,, The power-on light and one of the AIR QUALITY lights on the control panel goes on.

	AC4004:AIR QUALITY lights
Colour	Air quality
Blue	very good
Deep purple	good
Purple	fair
Red	bad

	AC4002:AIR QUALITY lights
Colour		Air quality
Blue		very good
Deep purple		good
Red		bad
	,, The appliance automatically starts operating in the auto mode.
	To switch off the appliance, press and hold the on/off button again until the
	power-on light goes out and unplug the appliance.
	Note:When the humidity level in the room is very high, it is possible that
	condensation develops on the air quality sensor. As a result, the AIR QUALITY
	lights on the control panel may indicate that the air quality is bad even though
	the air quality is good. In this case, the auto mode causes the appliance to
	run at high fan speed.You can solve this by cleaning the air quality sensor. If
	condensation develops frequently during periods of high humidity, we advise
	you to use one of the manual speed settings.
	Auto mode
	When the appliance is switched on, the built-in air quality sensor
	automatically measures the ambient air quality. When the auto mode is
	activated, the appliance selects the most appropriate fan speed for the
	measured air quality.
	Note:When you use the auto mode, you can also use the timer function (see
	section ‘Timer function in this chapter). In this case, the AUTO light, one of the
	FAN SPEED lights, the TIMER light and one of the HOUR lights are on.
		Press the on/off button to switch on the appliance.
	1
	,,	The appliance automatically starts operating in the auto mode.