Philips AC4002 manual English

20English

9 Put filter 3 (activated carbon filter) back into the appliance.

10AC4004 only: reattach filter 2 (multi-care filter) to the back of filter 1 (pre-filter).

Note: Make sure that the front of the multi-care filter points towards the pre- filter.

11 Put filter 1 (pre-filter) back into the appliance.

Note: Make sure that the side with the two projections points towards you.

Note: Make sure that all hooks are properly attached to the appliance. 

1	12	To reattach the front panel, insert the two hooks into the top of
		the appliance first (1).Then push the panel against the body of the
		appliance (2).
	13	Put the plug in the wall socket and switch on the appliance again.

14 Press and hold the reset button below the filter replacement light of the filter you have replaced to reset the appliance.

2

-- Press and hold the reset button for filter 2 for 2 seconds if you have replaced filter 2 (multi-care filter).