Specifications
AMPLIFIER SECTION | AK630 |
| |
RMS output power |
|
|
|
THD 10%, both channels driven | |||
1 kHz | 75 W per channel (5 Ω) | ||
(Low channel) | |||
10 kHz | 70 W per channel (5 Ω) | ||
(High channel) | |||
80 Hz |
| 160 W (8 Ω) | |
(Subwoofer channel) | |||
Total power output |
| 450 W | |
FTC output power |
|
|
|
THD 10%, both channels driven | |||
100 | 59 W per channel (5 Ω) | ||
(Low channel) | |||
3 | 57 W per channel (5 Ω) | ||
(High channel) | |||
50 |
| 130 W (8 Ω) | |
(Subwoofer channel) | |||
Total FTC power |
|
| 362 W |
AMPLIFIER SECTION AK633 RMS output power
THD 10%, both channels driven
1 kHz | 70 W per channel (5 Ω) | |
(Low channel) | ||
10 kHz | 65 W per channel (5 Ω) | |
(High channel) | ||
80 Hz |
| 160 W (8 Ω) |
(Subwoofer channel) | ||
Total power output | 430 W | |
FTC output power |
|
|
THD 10%, both channels driven | ||
100 | 55 W per channel (5 Ω) | |
(Low channel) | ||
3 | 53 W per channel (5 Ω) | |
(High channel) | ||
50 |
| 130 W (8 Ω) |
(Subwoofer channel) | ||
Total FTC power |
| 346 W |
FM/AM TUNER, TERMINALS SECTION
Preset station | FM 15 stations |
Frequency Modulation (FM) | AM 15 stations |
| |
Frequency range |
|
Sensitivity |
| 2.5 ØV (IHF) |
S/N 26 dB |
| 2.2 ØV |
Antenna terminal(s) 75 Ω (unbalanced) | ||
Amplitude Modulation (AM) |
| |
Frequency range |
| |
Sensitivity | ||
|
| |
S/N 20 dB (at 1000 kHz) | 560 ØV/m | |
Audio performance (Amplifier) | ||
Input sensitivity/Input impedance | ||
Aux | 250 mV, 14.7 kΩ | |
Phone jack |
|
|
Terminal | Stereo, 3.5 mm (1/8˝) jack |
CASSETTE DECK SECTION
Track system | 4 track, 2 channel |
Heads |
|
Record/playback | Solid permalloy head |
Erasure | Double gap ferrite head |
Motor | DC servo motor |
Recording system | AC bias 100 kHz |
Erasing system | AC erase 100 kHz |
Tape speed | 4.8 cm/s (17/8 ips) |
Overall frequency response | |
(+3 dB, | |
NORMAL | 35 |
S/N ratio | 50 dB (A weighted) |
Wow and flutter | 0.18% (WRMS) |
Fast forward and rewind time
Approx. 120 seconds with
DISC SECTION
Discs played [8 cm (3˝) or 12 cm (5˝)]
(1)
(2)
(3)MP3
Bit rate |
|
MP3 | 32 |
Sampling frequency | |
MP3 | 32 kHz, 44.1 kHz, 48 kHz |
CD | 44.1 kHz |
Decoding | 16 bit linear |
Digital filter | 8 fs |
D/A converter | MASH (1 bit DAC) |
Pickup |
|
Wavelength | 780 nm |
Beam Source | Semiconductor laser |
Audio output (Disc)
Number of channels
2 (Stereo) (FL, FR)
SPEAKER SECTION
Front speakers
Type
3 way, 3 speaker system (Bass reflex)
Impedance |
| 5 Ω |
HIGH |
| |
LOW |
| 5 Ω |
Speaker(s) |
|
|
Woofer | 16 cm (61/2˝) cone type | |
Tweeter | 6 cm (23/8˝) cone type | |
Super tweeter |
| Piezo type |
Input power (IEC) |
|
|
HIGH |
| 70 W (Max) |
LOW |
| 75 W (Max) |
Output sound pressure level | ||
Cross over frequency | 83 dB/W (1.0 m) | |
2.6 kHz, 10 kHz |
Frequency range 37
Dimensions (WxHxD) 240 x 330 x 230 mm
Mass | (97/16˝ x 13˝ x 91/16˝) |
3.2 kg (7.1 lb.) |
Subwoofer
Type
1 way, 1 speaker system (Bass reflex)
Impedance | 8 Ω |
Speaker(s) |
|
Subwoofer | 16 cm (61/2˝) cone type |
Input power (IEC) | 160 W (Max) |
Output sound pressure level
80 dB/W (1.0 m) Frequency range 40
45
Dimensions (WxHxD) 240 x 330 x 267 mm
Mass | (97/16˝ x 13˝ x 101/2˝) |
3.4 kg (7.5 lb.) |
GENERAL
Power supply | AC 120 V, 60 Hz |
Power consumption | 255 W |
Dimensions (WxHxD) 250 x 330 x 341 mm
Mass | (927/32˝ x 13˝ x 137/16˝) |
7.1 kg (15.7 lb.) |
Operating temperature range
+5 to +35 °C (+41 to +95 °F)
Operating humidity range
5 to 90 % RH (no condensation)
Power consumption in standby mode: 0.38 W
Note:
1.Specifications are subject to change without notice.
Mass and dimensions are approximate.
2.Total harmonic distortion is measured by the digital spectrum analyzer.
3.The labels “HIGH” and “LOW” on the rear of the speakers refer to High frequency and Low frequency.
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
•Never use alcohol, paint thinner or benzine to clean this unit.
•Before using a chemically treated cloth, read the instructions that came with the cloth carefully.
For a cleaner, crisper sound
Clean the heads regularly to assure good quality playback and recording.
Use a cleaning tape (not included).
Product Service
1.Damage requiring service
(a)The AC power supply cord or AC adaptor has been damaged; or
(b)Objects or liquids have gotten into the unit; or (c)The unit has been exposed to rain; or
(d)The unit does not operate normally or exhibits a marked change in performance; or
(e)The unit has been dropped or the cabinet damaged.
2.Servicing
3.Replacement parts
4.Safety check
Product information
For product information or assistance with product operation: |
|
In the U.S.A., refer to “Customer Services Directory” on the |
|
back cover. |
|
In Canada, contact the Panasonic Canada Inc. Customer Care |
|
Centre at | 15 |
or an authorized Servicentre closest to you. | |
| RQT7834 |