Set-up
Connect the AC power supply cord only after all other connections have been made. Optional antenna connections (A page 10).
Preparation
Twist and pull off the vinyl tip of the antenna wires and speaker cords.
(R)
4 AC power supply cord
Note
The included AC power supply cord is for use with this unit only.
Do not use it with other equipment.
For your reference
To save power when the unit is not going to be used for a long time, unplug it from the household AC outlet. You will need to reset some memory items after plugging in the unit.
2 AM loop antenna
Stand the antenna up
on its base.
1 |
(L)
1 FM indoor antenna
Affix where reception is best.
Adhesive
tape
1 |
2
3 Speakers
Placement
Place the front speakers so that the super tweeter is on the inside.
Connection |
| Connect the left (L) side | |
Red | Red in the same way. | ||
| |||
Gray |
| ||
Subwoofer
Super tweeter
Place on the floor or a sturdy shelf so that it won’t cause vibration.
Super tweeter
| Red (+) | |
Blue | Black | |
Red (+) | ||
Black | ||
Black |
Blue
Black
Gray (+)
Front speaker 
(left)
Note
Main unit
Subwoofer
Front speaker (right)
Use only the supplied speakers.
The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected.
Notes on speaker use
•You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods.
•Reduce the volume in the following cases to avoid damage.
–When playing distorted sound.
–When adjusting the sound quality.
•Keep your speakers at least 10 mm (13/32˝) away from the system for proper ventilation.
•These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism.
•You cannot take the front net off the speakers.
Caution
•Use the speakers only with the recommended
system. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.
•Do not attach these speakers to walls or ceilings.
Turning the demo function on/off
4 |
DISP, |
RQT7834 |
When the unit is first plugged in, a demonstration of its functions may be shown on the display.
If the demo setting is off, you can show a demonstration by selecting “DEMO ON”.
Press and hold [DISP,
The display changes each time the button is held down.
NO DEMO (off) |
| DEMO ON (on) |
|
While in the standby mode, select “NO DEMO” to reduce power consumption.
Note
DEMO function cannot be turned on when Dimmer is on.
