Panasonic RQT7834-3P Repeat play, Program play, Marking a track, Discs

Discs
						• To check program contents
			gCURSOR,			Press [g, REW/3] or [f, 4/FF].
ENTER						Every time you press the button:
			CURSOR f
TITLE			, ALBUM/			CD The track number and program order are displayed:
SEARCH			CHARA,
MARKER			, ALBUM/
			CHARA
DELETE
			g/REW/3,
			f/FF/4
			L, STOP			Track number	Program order
			:/ J, CD
						MP3 Program order is displayed, then album number and track
						number.
						• To add to the program
						CD Do steps 2 and 3.
	DISC					MP3 Do steps 2 ~ 4.
PROGRAM			Numbered			• To clear the last track
						Press [DEL].
			buttons
REPEAT						• To clear all tracks
	DEL		:/J, CD			Press [L, CLEAR].
						While “CLEAR ALL” is blinking, press the button again to clear all tracks.
L, CLEAR			CURSOR (	or	),	Note
			g, REW/3,			• You cannot program CD-DA together with MP3 tracks.
ALBUM (	or	)	f, 4/FF
						• MP3 The program memory is cleared when you change a disc or
	INTRO		ENTER
						open the disc tray.

		S.WOOFER				•
	MARKER	H.BASS	TITLE SEARCH				MP3	You cannot program more than one disc for MP3.
							Repeat play			CD	MP3
Program play
				CD	MP3	Remote control only
You can program up to 24 tracks.						Press [REPEAT] during play.
Remote control only						“	” is displayed.
						To cancel repeat play
CD
						Press [REPEAT] to clear “			” .
Preparation: Press [:/J, CD] and then [L, CLEAR].

1Press [PROGRAM].

“PGM” appears.

2Press [DISC] and then [1]–[5] to select the disc.

3Select the tracks with the numbered buttons.

To select a 2-digit track, press [>10] once then the two digits. Repeat steps 2 and 3 to program other tracks.

4Press [:/J, CD] to start play.

MP3

Preparation:

1.Press [DISC] and then [1]–[5] to select the disc.

2.Press [L, CLEAR].

1Press [PROGRAM].

Note

You can use repeat mode with program play (A see left) and Play Mode (A page 7) functions.

Marking a track
	CD	MP3

You can mark one track each on the discs loaded so that you can start play from them later.

To mark a track

1During play or stop

Select your desired track.

(A page 6, “Basic play – Skip/Search”).

“PGM” appears.

2Press [ALBUM ( or )] to select the album.

To select an album directly, press the numbered buttons

after pressing [ALBUM ( or )].

To select a 2-digit album, press [>10] once then the two digits. To select a 3-digit album, press [>10] twice then the three digits.

2Hold down [MARKER] until “STORING” blinks on the display.

The selected track is stored in the marker of the current disc.

Note

If a track is already stored in the marker, it will be replaced next time you store a new track in the same marker.

3Press [g, REW/3] or [f, 4/FF] to select the track.

To select a track directly, press the numbered buttons after pressing [g, REW/3] or [f, 4/FF].

To select a 2-digit track, press [>10] once then the two digits. To select a 3-digit track, press [>10] twice then the three digits.

4Press [ENTER].

Repeat steps 2 ~ 4 to program other tracks.

5Press [:/J, CD] to start play.

To recall a marked track number in the current disc

During play or stop

Press [MARKER] to recall a marker.

Play starts from the track recalled.

Note

•“NO MARKER” indicates that the marker in the current disc is empty.

•The marker memory is cleared when you open the disc tray.

•You cannot use this function during program play or random play.

To exit program mode

Press [PROGRAM] in the stop mode. (You can replay your program by pressing [PROGRAM] then [:/J, CD].)

You can do the following while “P” is displayed

8

RQT7834