13
RQT9708
ENGLISH
To preset the channel
5 While listening to the radio broadcast
Press [OK].
6Press [3,4] to select the channel and then
press [OK].

∫To improve FM sound quality

1 While receiving FM broadcasts, press
[PLAY MENU] repeatedly to select “FM MODE”
and then press [OK].
2Press [3,4] to select “MONO” and then press
[OK].
≥This setting can be preset and memorized. To do
so, continue to step 5 of “Manual tuning and
presetting”.
≥Select “STEREO” in step 2 to return to stereo broadcasts.
≥“MONO” is canceled if the frequency is changed.
≥If “MONO” is selected, regardless of the type of signal this
unit is receiving, “FM MONO” is displayed when [DISPLAY] is
pressed. (>below)

∫To display the current signal status

Press [DISPLAY].
≥“STEREO” is displayed when this unit tunes to a stereo
broadcast.

Internet Radio

This unit can output Internet radio if “vTuner for
Panasonic” is installed on your iPhone/iPod touch.
Preparation
≥Install “vTuner for Panasonic” to your iPhone/
iPod touch.
≥Install iOS 5.0 or later.
1Insert the iPhone/iPod touch to this unit.
2Press [iPod] repeatedly to select “VTUNER”.
{. “vTuner for Panasonic” starts.
≥Visit the below website for the following information about
“vTuner for Panasonic”:
http://radio.vtuner.com/panasonic/en/
(Compatible iPhone/iPod touch models and software
versions, purchasing, installation and operation details.)
≥A pop-up screen may appear on your iPhone/iPod touch.
Follow the indicated instructions.

Sound adjustment

The following sound effects can be added to the
audio output.
1Press [SOUND] repeatedly to select the effect
and then press [OK].
2Press [3,4] to select the setting and then
press [OK].
≥You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.

Clock and Timer

This is a 12-hour clock.
1Press [SETUP] repeatedly to select “CLOCK”
and then press [OK].
2Press [3,4] to set the time and then press
[OK].
≥To display the clock, press [SETUP] repeatedly to select
“CLOCK” and then press [OK] once. The time is displayed for
10 seconds.
(During standby, press [iPod MENU, DISPLAY] once.)
≥The clock is reset when there is a power failure or when the
AC power supply cord is removed.
≥Reset the clock regularly to maintain accuracy.
“FM ST”: The FM signal is in stereo.
“FM”: The FM signal is in monaural.
≥“FM” is also displayed even if this unit is not
tuned to a station.
Direct-Vocal
Surround
(
D.SURROUND
)
“LEVEL 1”, “LEVEL 2” or
“OFF”.
≥The factory preset is “OFF”.
Preset EQ
(PRESET EQ)
“HEAVY” (heavy), “SOFT”
(soft), “CLEAR” (clear),
“VOCAL” (vocal) or “FLAT”
(flat/off).
≥The factory preset is “HEAVY”.
Bass (BASS) or
Treble (TREBLE)
Adjust the level (j4 to i4).
Dynamic Bass
(D.BASS)
“ON D.BASS” or
“OFF D.BASS”.
≥The factory preset is
“ON D.BASS”.

Setting the clock

SC-HC57~RQT9708.book 13 ページ ２０１２年３月２日　金曜日　午後２時４分