Panasonic RX-EX1 Program play, Press PGM/CLEAR Enter the track number with the numbered buttons

Y

Listening

PLAY	RE	FADER	SLEEP	EQ ON
1	REC			ALL 1-REC ST
PGM	RANDOM			MONO
PLAY	RE	FADER	SLEEP	EQ ON
1	REC			ALL 1-REC ST
PGM	RANDOM			MONO

12

CDs

Program play:

Select up to 36 tracks to play in the order you choose

Preparation:

Press [] to switch to CD mode.

Remote control only

Press [PGM/CLEAR].

Enter the track number with the numbered buttons.

For tracks numbered 10 and over, press [ 10] then the two digits.

Repeat this step to program the tracks in the required order.

Press [CD].

All the tracks are played in the selected order.

The program remains intact even if play is stopped or the unit is turned off. “Cd-P” appears when play is stopped to indicate the contents are in the memory.

To cancel

Press and hold [PGM/CLEAR] in the stop mode until “CLEAR” is displayed.

The mode is also canceled if the CD tray is opened.

“FULL” is displayed

If more than 36 tracks have been programmed.

“-- --:-- --” is displayed

If the total play time of the program exceeds 100 minutes. You can still program and play tracks.

To check the contents of the program

While stopped

Press [REW/–/ ] or [ /+/FF].

Each time one of the buttons is pressed, a track and its order in the program are displayed.

Program play does not work when “” is displayed (press [CD PLAY MODE] to clear it) ( page 11).

Search can be done within tracks only.

RQT5671