Indicator / Control panel
●When pressing 4, 5, 6 buttons, the control panel guide appears on the side of the screen for 3 seconds to highlight the pressed button.
4
5
6
1 | 2 | 3 | 7 |
Rear side of the TV
1Remote control signal receiver
●Do not place any objects between the TV remote control signal receiver and remote control.
2Ambient sensor
●Senses brightness to adjust picture quality when [Ambient Sensor] in the Picture Menu is set to [On].
3Power LED
Red: Standby
Green: On
●The LED blinks when the TV receives a command from the remote control.
4Input mode selection
● Press repeatedly until you reach the desired
mode.
[Main Menu]
●Press and hold for about 3 seconds to display main menu.
OK (when in the menu system)
5Channel Up / Down
Cursor Up / Down (when in the menu system)
6Volume Up / Down
Cursor Left / Right (when in the menu system)
7Mains power On / Off switch
● Use to switch the mains power.
Using the On Screen Displays - Operation guide
Many features available on this TV can be accessed via the On Screen Display menu.
■Operation guide
Operation guide will help your operation by using the remote control.
Example: [Sound Menu]
Main Menu |
| 1/2 | |
|
|
|
|
Picture | Mode | Standard | |
Bass |
| 0 | |
Sound | Treble |
| 0 |
|
|
| |
Equaliser |
|
| |
Network | Balance |
| 0 |
Surround |
| Off | |
|
|
|
|
Timer | Auto Gain Control |
| Off |
|
|
| |
Volume Correction | 0 | ||
Setup | Speaker Distance to Wall |
| Over 30cm |
|
|
| |
SPDIF Selection |
| Auto | |
Help
Select |
|
|
| |
Change | Selects your favourite sound | Page up |
| |
mode. |
| |||
Page down |
| |||
| RETURN |
|
|
|
■How to use remote control
Open the main menu
Move the cursor / select from a range of options / select the menu item (up and down only) / adjust levels (left and right only)
Access the menu / store settings after adjustments have been made or options have been set
Return to the previous menu
Exit the menu system and return to the normal viewing screen
Operation guide
12
