Specifications (IHF’78)
■AMPLIFIER SECTION
Rated minimum sine wave RMS power output
40 |
|
0.9 % total harmonic distortion | 100 W per channel (6 Ω) |
1 kHz continuous power output both channels driven | |
0.05 % total harmonic distortion | 105 W per channel (6 Ω) |
Total harmonic distortion |
|
rated power at 40 | 0.9 % (6 Ω) |
half power at 1 kHz | 0.07 % (6 Ω) |
Power output at 1kHz each channel driven | |
0.9 % total harmonic distortion |
|
Front | 2 x 100 W (6 Ω) |
Center | 100 W (6 Ω) |
Surround | 2 x 100 W (6 Ω) |
Low frequency damping factor | 30 (6 Ω) |
Load impedance |
|
Front | |
Center | |
Surround | |
Dynamic headroom | 2 dB (6 Ω) |
Frequency response |
|
CD, TAPE, DVD, TV, VCR | 10 |
Input sensitivity |
|
CD, TAPE, DVD, TV, VCR | 27 mV (200 mV, IHF ’66) |
S/N (IHF A) |
|
CD, TAPE, DVD, TV, VCR | 75 dB (85 dB, IHF ’66) |
Input impedance |
|
CD, TAPE, DVD, TV, VCR | 22 kΩ |
Tone controls |
|
BASS | 50 Hz, +10 to |
TREBLE | 20 kHz, +10 to |
Subwoofer frequency response | |
|
|
Digital input |
|
Optical | 2 |
Coaxial | 1 |
■ FM TUNER SECTION
Frequency range |
| |
Sensitivity |
| 11.2 dBf (2 µV, IHF ’58) |
50 dB quieting sensitivity |
|
|
MONO |
| 18.3 dBf (4.5 µV, IHF ’58) |
STEREO |
| 38.3 dBf (45 µV, IHF ’58) |
Total harmonic distortion |
|
|
MONO |
| 0.2 % |
STEREO |
| 0.3 % |
S/N |
|
|
MONO |
| 73 dB |
STEREO |
| 67 dB |
Frequency response | 20 | |
Alternate channel selectivity |
| 65 dB |
Capture ratio |
| 1.5 dB |
Image rejection at 98 MHz |
| 40 dB |
Spurious response rejection at 98 MHz | 75 dB | |
AM suppression |
| 50 dB |
Stereo separation |
|
|
1 kHz |
| 40 dB |
10 kHz |
| 30 dB |
Antenna terminal |
| 75 Ω (unbalanced) |
■ AM TUNER SECTION
Frequency range | |
Sensitivity | 20 µV, 330 µV/m |
Selectivity | 55 dB |
IF rejection at 1000 kHz | 50 dB |
■ VIDEO SECTION
Output voltage at 1 V input (unbalanced) | 1±0.1 |
Maximum input voltage | 1.5 |
Input/output impedance | 75 Ω |
■ GENERAL
Power supply | AC 120 V, 60 Hz |
Power consumption | 410 VA, 320 W |
Dimensions (W x H x D) | 430 x 158 x 367 mm |
| |
Mass | 9.1 kg (20.1 lb.) |
Before use
Step 1
Step 2
Step 3
Power consumption in standby mode: | 1 W |
Notes:
1.Specifications are subject to change without notice. Mass and dimensions are approximate.
2.Total harmonic distortion is measured by the digital spectrum analyzer.
Step 4
Others
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
¡Never use alcohol, paint thinner or benzine to clean this unit.
¡Before using chemically treated cloth, read the instructions that came with the cloth carefully.
Reference
17
RQT6193