![Step 1 2 3 4 Settings](/images/new-backgrounds/11157/1115715x1.webp)
Step 1 2 3 4 Settings
Change the settings to suit your speakers and units to the environment in which you are using them. Before making any changes, read the descriptions of the settings, note the factory settings and ranges, and refer to the equipment’s instructions.
1
SIZE
Set the size to suit your speakers
LARGE:For speakers that can reproduce a full sound range, particularly the bass range below 100 Hz.
SMALL: For speakers that cannot adequately reproduce the bass range. This setting is sufficient for most speakers if you are using a subwoofer.
NONE: For speakers you haven’t connected (center or surround).
The factory settings are: FRONT: | LARGE |
CENTER and SURROUND: | SMALL |
For the subwoofer
2
DISTANCE
Enter the distance of the front, center and surround speakers from the seating position
Change the distance so that the sound from all the speakers (except for the subwoofer) reaches you at the same time.
You can select distances between 3 and 30 feet at
The factory settings are: FRONT and CENTER: | 10 FEET |
SURROUND: | 5 FEET |
Press at the same time to enter the setting mode.
3
FILTER
Change the
If you set the front speakers to “SMALL”, the filter is set to 100 Hz. Raise the
You can raise the
|
|
|
|
|
| SFC MODE | |
|
| w |
| q |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4
D-INPUT
Digital input
5
Adjusting speaker output level
8
Change these settings to suit the connections you have made to the three digital input terminals, COAX, OPT1 and OPT2, so that the correct source is selected when you turn [INPUT SELECTOR].
The factory settings are: CD: COAX DVD:OPT 2 TV: OPT 1
Adjust the level of the other speakers based on the output of the front speakers. (Adjust the volume of the front speakers with [VOLUME].)
C (center), SR (surround right), and SL (surround left) can be adjusted between
For SW (subwoofer), you can select
Turn SPEAKERS on.
SPEAKERS
RQT6193