19
RQT7994 ConnectionsSettingsBasic Operations Before useOperationsReference
Use the MULTI CONTROL menus to change the settings.
(ápage 18 “Basic operations with the MULTI CONTROL”)
1Enter the MULTI CONTROL.
Select the settings to change. (ábelow, right)
Adjusting the tone
You can adjust the level of the bass and treble.
2Select “TONE ” and press [ENTER].
3Select “BASS ” or “TREBLE ” and
press [ENTER].
BASS,
TREBLE
4Adjust the level and press [ENTER].
5Select another setting
Finish setting
Adjusting the volume balance
You can adjust the balance of the front speakers.
2Select “BALANCE ” and press [ENTER].
3Adjust the balance and press
[ENTER].
4Select another setting
Finish setting
Adjusting the brightness of the display
Dim the display for better viewing in a darkened room.
Choose a level between 1 (bright) and 3 (dim).
2Select “DIMMER ” and press [ENTER].
3Select “ON ” and press [ENTER].
•Select “OFF ” to cancel.
OFF, ON
4Select the level and press [ENTER]. LEVEL 1,
LEVEL 2,
LEVEL 3
5Select another setting
Finish setting
• When you operate the main unit or remote control, this is temporarily
canceled.
Sleep timer
The sleep timer can turn the unit off after a set time.
It does not control any other components.
2Select “SLEEP ” and press [ENTER].
3Select the time and press [ENTER].
When this is set, “SLEEP” appears on the display.
• To cancel, select “OFF ”.
OFF, 30, 60,
90, 120
(in minutes)
4Select another setting
Finish setting
• To check the setting:
After setting the time, you can check the remaining time using step 2.
• To change a setting:
Repeat the procedure from the beginning.