23
RQT7994 ConnectionsSettingsBasic Operations Before useOperationsReference
Select if noise is excessive during radio reception.
Preparation: Enter the MULTI CONTROL. (ápage 22 “Basic operations with the MULTI CONTROL”)
Preset tuning
Presetting stations
nAuto presetting
1Set the channel reception to FM 87.9 MHz or AM
530 kHz.
Preset channels that are automatically assigned by this unit are:
FM: 1 to 30
AM: 21 to 30
Preset the FM stations first. If the AM stations are preset before the
FM stations, they will be erased when the FM stations are preset.
2Enter the MULTI CONTROL.
(ápage 22 “Basic operations with the MULTI CONTROL”)
3Select “TUNER ” and press [ENTER].
4Select “AUTO MEM ” (AUTO MEMORY) and
press [ENTER].
5Select “START ” and press [ENTER].
•Select “CANCEL ” to cancel.
START,
CANCEL
• During automatic presetting, the memory indicator ( ) flashes
and the frequency scrolls. The memory indicator and channel
numbers are displayed for a second when a station is preset.
• The last station to be preset is displayed when presetting finishes.
• Frequencies may not preset correctly when broadcast waves are too
strong or too weak. In such cases, carry out presetting manually.
CANCEL
MULTI
CONTROL
M
nManual presetting
1Tune to the station you want to preset. (ápage 22)
2Enter the MULTI CONTROL.
(ápage 22 “Basic operations with the MULTI CONTROL”)
3Select “TUNER ” and press [ENTER].
4Select “MEMORY ” and press [ENTER].
5Select a channel number and press [ENTER].
“STORED ” is displayed.
• To continue presetting, press [TUNE 2 or 1] to tune another
station from step 1.
6Press [MULTI CONTROL, CANCEL] 2 times to
select “EXIT ” and press [ENTER].
• Even if the AC power supply cord is disconnected from the household AC
outlet, the stations remain in the memory for approximately two weeks.
• FM stations can also be preset in the MONO mode. (ábelow)
CANCEL
MULTI
CONTROL
Listening to preset stations
nOn the remote control
• Select the channel
• Press the numbered buttons to select the channel
To select a two digit number
e.g. 21: [ ≧10, ENTER] → [2] → [1]
nOn the main unit
1Press.
2Select the channel.
After 5 seconds, the display will change from the channel number
to the frequency.
• Hold down the button to change channels faster.
Reducing excessive noise
nDuring FM stereo reception
You can improve FM reception by switching reception to monaural.
nDuring AM reception
When there is a lot of noise interference with an AM broadcast, try
switching to this mode.
1Select “TUNER ” and press [ENTER]. 1Select “OPTION ” and press [ENTER].
2Select “FM MODE ” and press [ENTER]. 2Select “B PROOF ” (BEAT PROOF) and press [ENTER].
3Select “MONO ” and press [ENTER].
•Select “AUTO ” to cancel.
AUTO,
MONO 3Select “MODE A ” or “MODE B ” and press [ENTER].
4Press [MULTI CONTROL, CANCEL] 2 times to select