Specifications/Product Service

Specifications

g POWER AMPLIFIER SECTION1

RMS output power

10 % total harmonic distortion

Woofer Speaker ch

60 W (100 Hz, 3 )

Mid High Speaker ch

20 W (1 kHz, 8 )

System Total Power2

160 W (80 W x 2)

FTC output power

 

 

1.0 % total harmonic distortion

50 Hz to 250 Hz

Woofer Speaker ch 37 W (3 )

250 Hz to 20 kHz

Mid High Speaker ch 13 W (8 )

System Total Power2

100 W (50 W x 2)

g SPEAKER SECTION1

 

 

2-way 5 speakers system (Bass reflex type)

Woofer part

12 cm cone type x 1

Mid High part

2.4 x 10 cm flat type x 4

g SPEAKER GENERAL1

 

 

Power supply

AC 120 V, 60 Hz

Power consumption

20 W

Wireless Link Standby

0.8 W

 

In Standby condition

0.1 W

 

 

 

Dimensions ( W x H x D )

290 mm x 1231 mm x 290 mm

 

(11-13/32" x 48-15/32" x 11-13/32")

Mass [ Weight ]

Approx. 3.9 kg (8.6 lb.)

Operating temperature range

0°C to 40°C (32°F to 104°F)

Operating humidity range

20 % to 80 % RH (no condensation)

g WIRELESS SECTION

 

 

Frequency of the using band

2.4000 GHz to 2.4835 GHz

Number of using channels

3

The reaching distance

15 m (49 ft)3

1: per 1 speaker

 

 

2: use 2 speakers

3 It is under the condition as follows.

At same room indoor, there is not an obstacle between the main unit and the speaker.

And installing a main unit in the position with equal to or more than 50 cm height.

Note: 1. Specifications are subject to change without notice.

2.Total harmonic distortion is measured by the digital spectrum analyzer.

3.Total harmonic distortion is measured by using AES17 filter.

-If you see this symbol-

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

Product Service

1.Damage requiring service — The unit should be serviced by qualified service personnel if:

(a)The AC power supply cord or the plug has been damaged; or

(b)Objects or liquids have gotten into the unit; or

(c)The unit has been exposed to rain; or

(d)The unit does not operate normally or exhibits a marked change in performance; or

(e)The unit has been dropped or the cabinet damaged.

2.Servicing — Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel.

3.Replacement parts — When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

4.Safety check — After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.

The servicer will require all components to service your system. Therefore, should service ever be necessary, be sure to bring the entire system.

Product information

For product information or assistance with product operation:

In the U.S.A. and Puerto Rico, refer to “Customer Services Directory (United States and Puerto Rico)” on page 5.

In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you.

The model number and serial number of this product can be found on either the back or the bottom of the unit.

Please note them in the space provided below and keep for future reference.

MODEL NUMBER

SERIAL NUMBER

User memo:

DATE OF PURCHASE

DEALER NAME

DEALER ADDRESS

TELEPHONE NUMBER

4

VQT2T88

Page 4
Image 4
Panasonic SB-ZT1, SB-ZT2 important safety instructions Specifications, Product Service, User memo