Panasonic SC-AK320, SC-AK520, SC-AK523, SC-AK323 Basic play, CD display, Repeat play

CDs

Basic play

1Press [c, OPEN/CLOSE] to open the tray.

The unit comes on.

2Set a CD in the tray. (Label must face upward.)

To continue loading CDs in the other trays

Press [1]–[5] to select the required tray and press [c, OPEN/ CLOSE] to open the tray.

Press [c, OPEN/CLOSE] to close the tray.

3Press [1]–[5] to play your desired disc.

Current disc indicator

	1
5	2
4	3

(Alternatively, you can press [:/J, CD] if the current disc is your desired CD.)

The track number and its elapsed playing time are shown.

Use the CD Play Mode function’s ALL-DISC mode to play CDs in succession. (A see right)

To stop the disc play

Press [L, STOP].

The total number of tracks and total playing time are shown.

One touch play

During standby mode and when a CD is loaded, press [:/J, CD] or [1]–[5].

The unit comes on and play starts.

	To pause	Press [:/J, CD] during play.
		Press again to resume play.
	To search forward/	Hold down [g/REW/3] (backward)
	backward	or [f/FF/4] (forward) during play or pause.
	To skip forward/	Press [g/REW/3] (backward) or
8
	backward	4
		[f/FF/ ] (forward) during play or pause.

Note

•During 1-RANDOM or A-RANDOM play (A see below), you cannot skip to tracks already played.

•During program play (A page 9), 1-RANDOM or A-RANDOM play, you can search only within the track.

•You cannot use search function for MP3 files.

•Always stop the changer before loading or changing CDs. You cannot change CDs while a disc is playing.

CD display

You can display the remaining play time of the current track.

On the remote control

Press [CD DISP] during play or pause.

On the main unit AK320 AK323

Press [DISP, –DEMO] during play or pause.

Every time you press the button:

Elapsed play time ↔ Remaining play time

Note

When track number 25 or greater is playing, remaining play time display shows “– –:– –”.

Repeat play

Remote control only

Press [REPEAT] during play.

“” is displayed.

To cancel repeat play

Press [REPEAT] to clear “” .

To listen to specific CDs and tracks (CD Play Mode function)

Remote control only

Preparation: Press [:/J, CD] and then [L, CLEAR].

1Press [PLAY MODE] to select the desired mode.

Every time you press the button:

ALL-DISC 1-SONG 1-RANDOM A-RANDOM

		1-DISC
ALL-DISC:	Plays all loaded discs in succession from the
	selected disc to the final disc \.
1-SONG:	Plays one selected track on the selected disc.
1-RANDOM: Plays one selected disc in random order.
A-RANDOM: Plays all loaded discs in random order.
1-DISC:	Plays one selected disc.

(The original display is restored in about 2 seconds.)

Proceed to step 4 when you selected A-RANDOM in step 1.

2Press [DISC] and (within 10 seconds) [1]–[5] to select the disc.

The CD starts.

3Only when you selected “1-SONG” in step 1

Select the track with the numbered buttons.

To select a track 10 or over, press [>10] then the two digits. Play starts from the selected track.

4Only when you selected “A-RANDOM” in step 1

Press [:/J, CD] to start play.

To stop play

Press [L, CLEAR].

When playback ends

The current play mode will be retained in memory until it is changed even if the unit is turned off.

\Final disc

For example, if play starts from disc 4, disc 3 will be the “final disc”. Order of progression: Disc 4z5z1z2z3

Note

•You can use repeat mode with CD Play Mode function.

•You cannot use program mode together with CD Play Mode function.

RQT7330