Recording
To stop recording
Press [L, STOP].
If the tape finishes before the CD
The CD continues playing. Press [L, STOP] to stop it.
To record on the other side of the tape
Turn the tape over and press [a REC].
Reducing noise when recording AM
Remote control only
Hold down [PLAY MODE] while recording.
Every time you hold down the button: BP1 ↔ BP2
Choose the setting with the least noise.
Note
•Changes to volume and sound/field quality do not affect recording.
•You cannot open deck 1 while recording.
•You cannot
•When recording an AM broadcast, sound is momentarily interrupted when you start and stop the recording.
Erasure prevention
Use a screwdriver or similar object to break out the tab.
Side A
Tab for side B | Tab for side A |
To re-record on a protected cassette
Cover the hole with adhesive tape.
Adhesive tape
To erase a tape
1.Press [:, TAPE] and then [L, STOP].
2.Insert the recorded tape into deck 2. Ensure there is no tape in deck 1.
3.Press [a REC].
Optional antenna connections
Use outdoor antenna if radio reception is poor.
FM outdoor antenna
FM outdoor antenna (not included)
75 Ω coaxial cable (not included)
| 1 |
|
|
| 30 mm |
| 2 | (1 3/16”) |
| Shield braid | |
| 1 | |
|
| Shield braid |
| 15 mm | Core wire |
2 | (19/32”) | |
3 | Core wire | |
|
|
•Disconnect the FM indoor antenna.
•The antenna should be installed by a competent technician.
Optional antenna connections
AM outdoor antenna
AM outdoor antenna (not included)
5 
(16 – 40 ft.)
AM loop antenna (included)
Run a piece of vinyl wire horizontally across a window or other convenient location.
Leave the loop antenna connected.
Note
Disconnect the outdoor antenna when the unit is not in use. Do not use the outdoor antenna during an electrical storm.
External unit connections
Rear panel of | R L |
this unit |
|
(R) | (L) |
Analog player (not included)
•An analog player with a
•For details, refer to the instruction manual of the units which are to be connected.
•When units other than those described above are to be connected, please consult your audio dealer.
Using an external unit
REC
AUX
(See above for external unit connection.)
1.Press [AUX].
The unit comes on.
2.For listening: Proceed to step 3.
For recording: Press [a REC] (recording starts).
3.Start playback from the external source. (For details, refer to the external unit’s instruction manual.)
Using headphones (not included)
PHONES |
Reduce the volume level and connect the headphones.
Plug type: 3.5 mm (1/8˝) stereo
Note | 15 |
|
Avoid listening for prolonged periods of time to prevent hearing damage.
RQT6707
