Panasonic SC-AK630 specifications Radio, Manual tuning, Preset tuning

	g/REW/3,
	f/FF/4
TUNER, BAND	L, STOP
a, REC
	DECK 1/2
c DECK1	DECK2 c
	:, TAPE
	:/J, CD

CD/RDS DISP

DISC
PROGRAM	Numbered
PLAY MODE
	buttons

TUNER, BAND

ALBUM ( or ) g, REW/3, f, 4/FF

S.WOOFER

H.BASS

Radio

Manual tuning

1Press [TUNER, BAND] to select band.

The unit comes on.

Every time you press the button: FM AM

2Press [PLAY MODE] on the remote control to select

“MANUAL”.

Every time you press the button: MANUAL PRESET

3Hold down [g/REW/3] or [f/FF/4] for a moment to search for a station.

The frequency stops when it finds a clear station.

To stop during the process, press [g/REW/3] or [f/FF/4].

Under excessive interference, a station may not be found.

Press [g/REW/3] or [f/FF/4] repeatedly to tune step-by- step.

“TUNED” is displayed when a radio station is tuned.

“ST” is displayed when a stereo FM broadcast is being received.

If noise is excessive in FM

Remote control only

Hold down [PLAY MODE] to display “MONO”.

Monaural sound is selected and noise reduces when reception is weak.

Hold down [PLAY MODE] again to cancel the mode. “MONO” is also cancelled if the frequency is changed.

For Europe

RDS broadcasting

Remote control only

This unit can display the text data transmitted by the radio data system (RDS) available in some areas.

If the station you are listening to is transmitting RDS signals, “RDS” will light up on the display.

Press [CD/RDS DISP].

Every time you press the button:

a Frequency display,	b Frequency display,
Station name (PS)	Program type (PTY)

Example: b

Program type

10
	Frequency display

Radio

Program type displays

NEWS	VARIED	FINANCE	COUNTRY
AFFAIRS	POP M	CHILDREN	NATIONAL
INFO	ROCK M	SOCIAL A	OLDIES
SPORT	M-O-R- M❈	RELIGION	FOLK M
EDUCATE	LIGHT M	PHONE IN	DOCUMENT
DRAMA	CLASSICS	TRAVEL	TEST
CULTURE	OTHER M	LEISURE	ALARM
SCIENCE	WEATHER	JAZZ

❈“M-O-R- M”=“Middle of the road music”

For South Africa

AM allocation setting

Main unit only

By adjusting the allocation, you can enable this tuner to receive AM broadcasts allocated in 10 kHz steps.

Press and hold [TUNER, BAND]. After a few seconds, the display will change to a flashing display of the current minimum AM frequency. If you continue to hold the button down, the minimum frequency will change. Release the button at this time.

To return to the original frequency indication, repeat above.

Note

•RDS displays may not be available if reception is poor.

•After changing the “allocation” setting, the frequencies you previously preset in the memory will be cleared.

•Sound is momentarily interrupted if you load/unload tapes while listening to an AM broadcast.

Preset tuning

Remote control only

There are two methods of pre-setting stations.

Automatic presetting	: All the stations the tuner can receive are preset.
Manual presetting	: You can select the stations to preset and the
	order they are preset in.

Up to 15 stations each can be set in the FM and AM bands.

Preparation:

Press [TUNER, BAND] to select “FM” or “AM”.

Automatic presetting

Do the following once each for FM and AM.

Preparation: Tune to the frequency where pre-setting is to begin.

Hold down [PROGRAM] until the frequency changes.

The tuner presets all the stations it can receive into the channels in ascending order. When finished, the last station memorized is tuned in.

Manual presetting

Pre-set the stations one at a time.

1Press [PROGRAM] then press [g, REW/3 ] or [f, 4/FF] to tune to the desired station.

2Press [PROGRAM] then press [g, REW/3 ] or [f, 4/FF] to select a channel.

3Press [PROGRAM].

The station occupying a channel is erased if another station is preset in that channel.

Selecting channels

Press the numbered buttons to select the channel.

To enter a 2-digit channel, press [>10], then the two digits.

OR

1Press [PLAY MODE] to select “PRESET”.

2Press [g, REW/3] or [f, 4/FF] to select the channel.

RQT7837