Panasonic SC-AK630 Set-up, Turning the demo function on/off, AC mains lead, FM indoor antenna

Set-up

Connect the AC mains lead only after all other connections have been made. Optional antenna connections (A page 11).

Preparation	2 AM loop antenna
Twist and pull off the vinyl tip of the antenna wire (for South Africa, Australia	Stand the antenna
and N.Z.) and speaker cords.
	up on its base.
4 AC mains lead

For Europe For others

1	1
2	2

FOR THE UNITED KINGDOM ONLY

READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.

Insertion of connector	Appliance	Connector
Even when the connector is perfectly
	inlet
inserted, depending on the type of inlet
	Approx. 6 mm
used, the front part of the connector may
jut out as shown in the drawing. However there is no problem using the unit.

Note

The included AC mains lead is for use with this unit only.

Do not use it with other equipment.

For your reference

To save power when the unit is not going to be used for a long time, unplug it from the household mains socket. You will need to reset some memory items after plugging in the unit.

(R)

1 FM indoor antenna

Tape the antenna where reception is best.

For Europe

Adhesive tape

For others

(L)

Adhesive tape

1

					2
					To household mains socket
3 Speakers			Red		Connect the left (L) side
Placement		Connection		Red	in the same way.
			Gray
Place the front speakers so that the super tweeter is on the
					Subwoofer
inside.
Super tweeter	Place on the floor or a	Super tweeter
	sturdy shelf so that it				Red (+)
	won’t cause vibration.

Blue	Black
	Red (+)
Black
	Black (–)
	(SB-WAK630)
Blue (–)	Black (–)
	Gray (+)

Front speaker	Main unit
	Front speaker
(left)	(right)
	Subwoofer

Note

•Keep your speakers at least 10 mm away from the system for proper ventilation.

•These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism.

•You cannot take the front net off the speakers.

Use only the supplied speakers.

The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected.

Notes on speaker use

•You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods.

•Reduce the volume in the following cases to avoid damage.

–When playing distorted sound.

–When adjusting the sound quality.

Caution

•Use the speakers only with the recommended system. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

•Do not attach these speakers to walls or ceilings.

Turning the demo function on/off

4	DISP, –DEMO
RQT7837

When the unit is first plugged in, a demonstration of its functions may be shown on the display.

If the demo setting is off, you can show a demonstration by selecting “DEMO ON”.

Press and hold [DISP, –DEMO].

The display changes each time the button is held down.

NO DEMO (off) DEMO ON (on)

While in the standby mode, select “NO DEMO” to reduce power consumption.

Note

DEMO function cannot be turned on when Dimmer is on.