
Cassette tape – Play and record (Continued)
2 Press [0 OPEN] for DECK 1 or [OPEN 0] for DECK 2 and insert the cassette.
Insert with the side to be played facing towards you and the exposed tape facing down. Close the holder by hand.
Front side
3 Press [3, TAPE] to start play.
To | Action |
stop tape playback | Press [ 7, STOP]. |
|
|
Press [4/ REW / ] or [ / FF / ¢]. | |
rewind |
|
|
|
select between | Press [DECK 1/2] (remote control : |
loaded decks | [PLAY MODE]). |
|
|
Note:
•Tape playback is momentarily interrupted if you open the other deck.
•Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism.
•Tape slack can get caught up in the mechanism and should be wound up before the tape is played.
•Endless tapes can get caught up in the deck’s moving parts if used incorrectly.
Recording
Selection of tapes for recording
Use normal position tapes.
High position and metal position tapes can be used, but this unit will not be able to record or erase them correctly.
Preparation
Wind up the leader tape so recording can begin immediately.
1 Press [OPEN 0] for DECK 2 and insert the cassette to be recorded.
Insert with the side to be recorded facing towards you and the exposed tape facing down.
2 Select the source to be recorded. Radio recording:
Tune in the station. (\ page 12)
Disc recording:
➀Insert the disc(s) you want to record. Press [6, CD] and then [7, STOP].
➁Prepare the desired disc recording mode.
ToAction
record
programmed
tracks Perform steps 2 to 4 in “Program play” (\ page 8).
Perform steps 3 to 6 in “Program play” (\ page 8).
By remote control only |
| |
record | 1) Press [DISC] and then [1] ~ [5] to select |
|
specifi c | the disc. |
|
discs/tracks | Ensure disc is stopped. | ENGLISH |
| 2) Press [PLAY MODE] to select the desired | |
|
| |
| mode (\ page 7). |
|
| 3) |
|
| For |
|
| Press [ALBUM ( or )] to select the |
|
| album. |
|
|
|
|
For
Press [4, REW /] or [¢,
/ FF] to select the track.
Tape-to-tape recording:
➀Press [3, TAPE] and then [7, STOP].
➁Press [0 OPEN] for DECK 1 and insert the cassette to record.
3 Press [¶, REC] to start recording. | DANSK | ||
| |||
|
|
| |
Other basic operations |
| ||
|
|
|
|
| To | Action |
|
| stop recording | Press [7, STOP]. |
|
|
|
|
|
| record on the other | Turn the cassette over and press [¶, REC]. |
|
| side of the tape |
|
|
|
|
|
|
| erase a recorded | 1) Press [3, TAPE] and then [7, STOP]. |
|
| sound | 2) Insert the recorded cassette into |
|
|
| DECK 2. Ensure there is no cassette in | FRANÇAIS |
• You cannot open DECK 1 while recording. | |||
|
| DECK 1. |
|
3) Press [¶, REC].
Note:
• Changes to volume and sound adjustments quality do not affect recording.
• You cannot
Erasure prevention
The illustration shows how to remove the tabs to prevent recording. To record on the tape again, cover as shown.
Side A | LANG - 4 | |
Tab for side B Tab for side A | ||
| ||
To |
| |
Normal cassette |
| |
Adhesive tape |
| |
| LANG - 5 | |
| RQTV0071 |
11
RQT8043