Panasonic SC-AK640 Advanced play, Changing multiple discs Multi Change, Program play

Discs (Continued)

ENGLISH

DANSK	Numeric
	buttons

FRANÇAIS
	Changing multiple discs (MULTI CHANGE)
	By main unit only
	1	Press [0, MULTI CHANGE] to open the trays.
	2	Press the button repeatedly to check and change
		multiple discs.

Note:

•The tray with a disc being played will not open.

•If the player is stopped, all trays will open. To close the remaining trays simultaneously, press [0, OPEN/CLOSE].

Changing a single disc (SINGLE CHANGE)

- 4		By main unit only
LANG		While one disc is playing, you can change the discs in other
		trays.
		1	Press [0, SINGLE CHANGE].
		2	Press [1 3~ 5 3] to select the desired tray.
		3	Change the disc.
		4	Press [0, SINGLE CHANGE] again to close the tray.
		Checking the track information
- 5		You can select a desired disc display mode.
		Press [DISPLAY] during play or pause.
LANG
		Elapsed play time			Remaining play time
		Elapsed			Remaining			Album Name
		play time		➞	play time		➞
	RQTV0071		➞					➞
		Tag (Artist)		➞ Tag (Track)		➞	Tag (Album)	➞ Track Name

8

Note:

•When track number 25 or greater is playing, remaining play time display shows “– –:– –”.

•When a title is longer than 9 characters, it will scroll across the display. The scrolling will start after every 3 seconds.

•“NO TAG” is displayed if titles with tags have not been entered.

•Maximum number of displayable characters: approximately 32

•This unit can display album, track and artist name with WMA tags and MP3 ID3 tags (version 1.0 and 1.1).

•Titles containing text data that the unit does not support cannot be displayed.

•ID3 is a tag embedded in MP3 track to provide information about the track.

•Titles entered with 2-byte code cannot be displayed correctly on this unit.

Advanced play

Program play

This function allows you to program up to 24 tracks.

1	Press [6, CD] and then [7, CLEAR].
2	Press [PROGRAM].
	“PGM” appears.
3	Press [DISC] and then [1] ~ [5] to select the disc.
4	Press the numeric buttons to select your desired
	track.
	Repeat steps 3 to 4 to program other tracks.
5	Press [6, CD] to start play.
1	Press [DISC] and then [1] ~ [5] to select the disc.
2	Press [7, CLEAR].
3	Press [PROGRAM].
4	Press [ALBUM (	or )] to select your desired
	album.
	To select an album directly, press the numeric
	buttons after pressing [ALBUM ( or		)].
5	Press [4, REW /	] or [¢, / FF] to select the
	track.
	To select a track directly, press the numeric buttons
	after pressing [4, REW / ] or [¢,		/ FF].
6	Press [ENTER].
	Repeat steps 4 to 6 to program other tracks.
7	Press [6, CD] to start play.

For two-digit track, press [h10] once then the two digits. For three-digit track, press [h10] twice then the three digits.

To	Action
cancel	Press [PROGRAM] in the stop mode.
program mode
replay the	Press [PROGRAM] then [6, CD] in the stop
program	mode.
add to the
program	Repeat steps 3 to 4 in the stop mode.
	Repeat steps 4 to 6 in the stop mode.

RQT8043