ESPAÑOL
DANSK
FRANÇAIS
Caution for AC Mains Lead
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience.
A
Should the fuse need to be replaced please ensure that the replacement fuse has a rating of
Check for the ASTA mark m or the BSI mark o on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is refi tted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY
If a new plug is to be fi tted please observe the wiring code as stated below.
If in any doubt please consult a qualifi ed electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL n OR COLOURED
GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug (fi gures A and B). Confi rm the AC mains plug fi tted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Figure A | Figure B |
Fuse cover
2. Replace the fuse and close or attach the fuse cover.
Figure A | Figure B |
Fuse | Fuse |
(5 ampere) | |
(5 ampere) |
|
|
| Safety precautions | |
- 4 |
|
| |
| Placement | ||
LANG |
| ||
| Set the unit up on an even surface away from direct | ||
| sunlight, high temperatures, high humidity, and excessive | ||
|
| vibration. These conditions can damage the cabinet and | |
|
| other components, thereby shortening the unit’s service life. | |
|
| Place it at least 15 cm away from wall surfaces to avoid | |
|
| distortion and unwanted acoustical effects. | |
|
| Do not place heavy items on the unit. | |
|
|
| |
|
| Voltage | |
|
| Do not use high voltage power sources. This can overload | |
|
| the unit and cause a fi re. | |
5 |
| Do not use a DC power source. Check the source | |
- |
| carefully when setting the unit up on a ship or other place | |
LANG |
| where DC is used. | |
|
| ||
|
|
| |
|
| AC mains lead protection | |
|
| Ensure the AC mains lead is connected correctly and not | |
|
| damaged. Poor connection and lead damage can cause fi re | |
|
| or electric shock. Do not pull, bend, or place heavy items on | |
RQTV0205 |
| the lead. | |
| Grasp the plug fi rmly when unplugging the lead. Pulling | ||
|
| ||
|
| the AC mains lead can cause electric shock. | |
|
| Do not handle the plug with wet hands. This can cause | |
|
| electric shock. | |
4 | |||
|
| ||
RQT8043 |
|
|
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain fl ammable gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service center. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualifi ed persons.
Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time.
2/22/07 7:01:58 PM |
