Panasonic SC-BTT465, SC-BTT405, SC-BTT466 Messages on the screen, Messages on the unit’s display

Messages on the screen

Cannot play.

¾You inserted an incompatible disc (Discs recorded in PAL video, etc.).

Cannot display on this unit.

¾You tried to play a non-compatible image.

¾Re-insert the media.

No disc inserted.

¾The disc may be upside down.

$This operation is not available.

¾Some operations are unsupported by the unit. (For example, reverse slow motion, etc.)

IP address is not set.

¾The “IP Address” in “IP Address/DNS Settings” is “---. ---. ---. ---”. Set the “IP Address”, “Subnet Mask”, and “Default Gateway”. (Select the automatic address acquisition if necessary.)

The current wireless network security setting is weak. It is recommended to change to a stronger security setting.

¾Set a stronger network security level referring to the wireless router owner’s manual.

Messages on the unit’s display

U59

¾Temperature of this unit is hot and the unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.

Install or place this unit with good ventilation.

Hor F

(“  ” stands for a number.)

¾Check and correct the speaker cable connections.

¾There is something unusual.

¾Check the unit using the troubleshooting guide. If the service number remains

displayed, do the following.

1Disconnect the plug from the AC outlet, wait a few seconds, then reconnect it.

2Press [Í/I] to turn the unit on.

If the service number remains displayed despite doing the above, request service from the dealer. Inform the dealer of the service number when requesting service.

40 VQT5F60