Optional audio/video equipment connections, To playback

Optional audio/video equipment connections

≥Turn the unit off before making connections.				AUDIO OUT
≥Refer to the manual of the other unit for details.				AUDIO OUT
≥Refer to the manual of the other unit for details.				R
(Cables and equipment not included.)				R
(Cables and equipment not included.)
				L
				Audio cable
				Laser disc player/Video cassette recorder, etc.
				You can playback the sound from a laser disc player/video cas-
FM		AM ANT		sette recorder, etc. through this unit’s speakers.
FM	LOOP EXT			sette recorder, etc. through this unit’s speakers.
ANT 75	R	L		This unit has Dolby Pro Logic circuitry. The sound will be repro-
		L
S-VIDEO
S-VIDEO
OUT		AUX	White (L)	duced with the same powerful stereophonic effects found in mov-
		AUX
VIDEO
VIDEO				ie theaters.
OUT

				When connecting a record player
	Red (R)			We recommend using a record player with a built-in phono equal-
	Red (R)			izer. If your player doesn’t have a built-in equalizer, connect it first

S-VIDEO IN				to a separate equalizer and then connect that to this unit.
S-VIDEO IN
S-VIDEO cable				To playback
S-VIDEO cable				1 Press [TUNER/AUX] to select “ AUX” .
TV with an S-VIDEO terminal				1 Press [TUNER/AUX] to select “ AUX” .
TV with an S-VIDEO terminal				Each time you press the button:
The S-VIDEO OUT terminal achieves a more vivid picture than				FM>AM>AUX
VIDEO OUT terminal by separating the chrominance (C) and				^--------------------}
luminance (Y) signals before transmitting them to the televi-

sion. (Actual results depend on the television.)	2 Start play.

Use outdoor antennas if radio reception is poor.

Note

Disconnect the antenna when the unit is not in use.

Do not use the outdoor antenna during an electrical storm.

Run a piece of vinyl wire horizontally across a window or other conve- nient location.

Leave the loop antenna connected.

AM outdoor antenna

5–12m (16–39 feet)

AM loop antenna

Other functions

FM outdoor antenna

≥Disconnect the FM indoor antenna.

≥The antenna should be installed by a competent technician. Rework your outdoor antenna’s 75 ≠ coaxial cable as follows.

75 ≠ coaxial cable

(not included)

Antenna plug

(included)

1Remove a piece of the outer vinyl insulator.

10 mm (13⁄32z)

2Carefully pull the tabs apart to remove the cover.

3 Install the coaxial cable.

4 Attach the cover.

Clamp the cable conductor, and wind it on so that it does not contact anything else.

10 mm (13⁄32z) Peel back

7 mm (9⁄32z)

Clamp with pliers	29

RQT6220