STEP3 Speakers
Sheet of speaker- cord stickers
1Attaching the stickers to the speaker cords
Attach the
1 Front (L) | 3 Surround (L) | 5 Center |
Simple setup
FRONT | SURROUND | CENTER | |
Lch | Lch | ||
| |||
1 | 3 | 5 | |
|
| e.g. 1 Front (L) | |
|
| 6 Subwoofer | |
2 Front (R) |
| 4 Surround (R) |
FRONT
Rch
2
SURROUND
Rch
4
SUB
WOOFER
6
Attaching to a wall
Front and surround speakers can be attached to a wall.
Set the speaker onto screw and slide through bracket to lock into position.
| |
| |
| |
Screw | |
| |
(not included) | |
Note | |
|
The wall or pillar on which the speakers are to be attached should be capable of supporting 5 kg (11 Ib.) per screw.
If irregular coloring occurs on your television
These speakers are designed to be used close to a television, but the picture may be affected with some televisions and setup com- binations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the
problem. If it persists, move the speakers further away from the
6 television.
Notes on speaker use
≥You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods.
≥Reduce the volume in the following cases to avoid damage.
Caution
≥Use the speakers only with the recom- mended system. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if dam- age has occurred or if you experience a sudden change in performance.
≥Do not attempt to attach these speakers to walls using methods other than those de- scribed in this manual.
RQT6220