Panasonic SC-HC25 Table of contents, Making the connections, Preparing the remote control

ENGLISH

Table of contents
IMPORTANT SAFETY INSTRUCTIONS	............ 3
Listening caution	3
Product service	3
Preparing the remote control	4
Making the connections	4
Overview of controls	5
Discs	6
Using an iPod or iPhone	7
Radio	8
Clock and timers	8
Sound effects	9
External equipment	9
Remote control code	9
Troubleshooting guide	9
Maintenance	10
Specifications	10
Limited Warranty	11
Español
Cómo preparar el control remoto	12
Cómo realizar las conexiones	12
Visión de los controles	13
Discos	14
Cómo usar un iPod o iPhone	14
Radio	15
Reloj y temporizador	15

“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Please note that the use of this accessory with iPod, or iPhone may affect wireless performance.

iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

Making the connections

Conserving power

The system consumes approximately 0.1 W when it is in standby mode. Disconnect the power supply if you do not use the system.

Some settings will be lost after you disconnect the system. You have to set them again.

Preparing the remote control

(not included)

Use alkaline or manganese battery.

Install the battery so that the poles (+ and –) align with those in the remote control.

Point the remote control at the remote control sensor (Z 5), away from obstacles, at a maximum range of 7 m (23 feet) directly in front of the main unit.

CAUTION!

• Do not break open or short-circuit the battery.

• Do not charge the alkaline or manganese battery.

• Do not use the battery if the cover has peeled off.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.

• Mishandling of battery can cause electrolyte leakage, which can cause a fire.

• Remove the battery if you do not use the remote control for a long

RQTX1249	period of time. Keep in a cool, dark area.
	CAUTION!
	Danger of explosion if battery is incorrectly replaced. Replace only
4	with the same or equivalent type recommended by the manufacturer.
	Dispose of used batteries according to the manufacturer’s
	instructions.

1 Connect the FM indoor antenna.

Place the antenna where reception is best.

Adhesive tape

2 Connect the AM loop antenna.

Click!

3 Connect the AC power supply cord.

Use the included AC power supply cord with this system only. Do not use an AC power supply cord from other equipment.

Note:

•These speakers do not have magnetic shielding. Do not put them near TVs, PCs or other equipment easily influenced by magnetism.

•You cannot remove the net of the speakers.