13
RQT9731
[SC-HC28DB]
DAB/DAB+ reception is poor.
≥Keep the antenna away from computers, televisions, other cables
and cords.
≥Use an outdoor antenna (l5).
A beat sound or noise is heard while receiving
radio broadcast.
≥Adjust the position of the antenna.
≥Try to keep a certain amount of distance between the antenna and
AC mains lead.
≥Try using an outdoor antenna if there are buildings or mountains
nearby.
≥Switch the television or other audio players off or separate it from
this unit.
≥Keep this unit away from mobile phones if the interference is
apparent.
Cannot charge or operate.
≥Have you selected the appropriate selector?
Press [iPod] to select either “IPOD_DOCK” or “IPOD_PORT”.
≥Check that the iPod/iPhone/iPad is connected properly. (l6)
≥The battery of the iPod/iPhone/iPad is depleted. Charge the iPod/
iPhone/iPad, and then operate again.
≥Connect the iPod/iPhone/iPad again or try to restart the iPod/
iPhone/iPad.
≥When this unit is in standby mode, charging will not start when
using the “IPOD_PORT” connection.
Turn this unit on and make sure the charging has started before
switching this unit to standby mode.
The remote control doesn’t work properly.
≥The remote control and this unit are using a different code.
(l14, “REMOTE”)
≥Is the battery depleted or is the battery inserted incorrectly? (l4)
The following messages or service numbers may
appear on the unit’s display.
“--:--”
≥You plugged the AC mains lead in for the first time or there was a
power failure recently. Set the time (l11).
“ADJUSTCLOCK”
≥Clock is not set. Adjust the clock accordingly.
“ADJUSTTIMER”
≥Play timer is not set. Adjust the play timer accordingly.
“AUTOOFF”
≥The unit has been left unused for about 30 minutes and will shut
down within a minute. Press any button to cancel it.
[SC-HC28DB] “CHECKINGCONNECTION”
≥The unit is checking the connected iPod/iPhone/iPad.
≥If this display keeps appearing, make sure that the battery of the
iPod/iPhone/iPad is not depleted and that the iPod/iPhone/iPad is
turned on and connected correctly (l6).
[SC-HC28DB]
“DOCK OPEN”
≥Is the dock open? Close the dock completely to open the sliding
door.
“ERROR”
≥Incorrect operation is performed. Read the instructions and try
again.
“F” (“ ” stands for a number.)
≥There is a problem with this unit.
Note down the displayed number, disconnect the AC mains lead
and consult your dealer.
“ILLEGALOPEN”
≥Sliding door is not in correct position. Turn the unit off and on
again. If this display appears again, consult the dealer.
[SC-HC28DB]
“IPOD_DOCKOVER CURRENT ERROR”
“IPOD_PORTOVER CURRENT ERROR”
≥The iPod/iPhone/iPad is drawing too much power. Disconnect the
iPod/iPhone/iPad and turn the unit off and on again.
≥The USB device is drawing too much power. Switch to “CD”
mode, remove the USB and turn the unit off.
“NODEVICE”
≥[SC-HC28DB]The iPod/iPhone/iPad device is not inserted correctly.
Read the instructions and try again (l6).
≥[SC-HC28DB]The battery of the iPod/iPhone/iPad is depleted.
Charge the iPod/iPhone/iPad and turn it on before connecting.
≥The USB device is not inserted. Check the connection.
“NODISC”
≥Insert the disc to be played (l6).
Radio≥Confirm the antenna is properly connected. (l5)
[SC-HC28DB]
iPod/iPhone/iPad operationsRemote controlMessagesSC-HC28_18_EB~RQT9731-B.book 13 ページ ２０１３年１月３日 木曜日 午後８時２５分