14
RQT9731
[SC-HC28DB]
“NOMEMORY”
There are no preset DAB/DAB+ stations to select. Preset some
channels. (l8)
“NOPLAY”
A CD that is not in CD-DA or MP3 format is inserted. It cannot be
played.
If there are more than 255 albums or folders (audio and
non-audio), some of the MP3 files in these albums may not be
read and played. Transfer these music albums to another USB.
Alternatively, reformat the USB device and save these music
albums prior to saving the other non-audio folders.
[SC-HC28DB]
“NOSIGNAL”
This station cannot be received. Check your antenna (l5).
[SC-HC28DB] “NOTSUPPORTED”
You have connected an iPod/iPhone/iPad that cannot be played
(lright).
If the iPod/iPhone/iPad is compatible, turn it on and connect it
correctly.
“READING”
The unit is checking the CD information. After this display has
disappeared, start operating.
“REMOTE” (“ ” stands for a number.)
The remote control and this unit are using different codes. Change
the code on the remote control.
– When “REMOTE 1” is displayed, press and hold [OK] and
[RADIO] for more than 4 seconds.
– When “REMOTE 2” is displayed, press and hold [OK] and [CD]
for more than 4 seconds.
[SC-HC28DB]
“SCANFAILED”
Stations are not receivable. Check your antenna and try Auto
scanning (l8).
If “SCANFAILED” is still displayed find the best signal reception
with the “MANUAL SCAN” tuning function. (l9)
[SC-HC18] “USB OVER CURRENT ERROR”
The USB device is drawing too much power. Switch to “CD”
mode, remove the USB and turn the unit off.
Playable media
Compatible with “IPOD_DOCK” connection
(Using Lightning connector)
Compatible with “IPOD_PORT” connection
[Using dedicated USB cable (not supplied)]
(as of December 2012)
Compatibility depends on the software version. Update your
iPod/iPhone/iPad to the latest software before using it with
this unit.
Please be aware that Panasonic accepts no responsibility for
the loss of data and/or information.
A disc with the CD Logo.
This unit can play back discs that conform to the CD-DA
format.
The unit may not be able to play some discs due to the
condition of the recording.
This unit does not guarantee connection with all USB
devices.
FAT12, FAT16 and FAT32 file systems are supported.
This unit supports USB 2.0 full speed.
This unit can support USB devices of up to 32GB.
[SC-HC28DB]

Compatible iPod/iPhone/iPad

iPodtouch (5th generation)
iPod nano (7th generation)
iPhone5
iPadmini
iPodtouch
1st, 2nd, 3rd, 4th, and 5th generation
iPod nano
2nd, 3rd, 4th, 5th, 6th, and 7th generation
iPhone5 / iPhone 4S / iPhone 4 / iPhone 3GS /
iPhone3G / iPhone
iPad (3rd, and 4th generation) / iPad 2 / iPad
iPadmini

Compatible CD

Compatible USB devices

SC-HC28_18_EB~RQT9731-B.book 14 ページ 2013年1月3日 木曜日 午後8時25分