4
RQT9869
Making the connections
Connect the AC mains lead only after all the other
connections have been made.
1 For the United Kingdom and Ireland
Connect the DAB antenna.
Be sure to tighten fully the nut.
Do not use any other DAB antenna except the
supplied one.
For others
Connect the FM indoor antenna.
2 For Australia and New Zealand
Connect the AM loop antenna.
Stand the antenna up on its base until it clicks.
3Connect the AC mains lead.
Do not use any other AC mains lead except the
supplied one.
Conserving power
The system consumes a small amount of power
(Z“Specifications”) when it is in standby mode.
Disconnect the power supply if you do not use the
system.
Some settings will be lost after you disconnect the
system. You have to set them again.
Note:
• These speakers do not have magnetic shielding. Do not put
them near TVs, PCs or other equipment easily influenced
by magnetism.
• Tape the DAB or FM antenna to a wall with the least
amount of interference.
• Use a DAB or FM outdoor antenna if the reception is poor.
Preparing the remote control
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.
Adhesive tape
(not supplied)
Adhesive tape
(not supplied)
(For the AC mains plug of three pins)
READ THE “Caution for AC mains lead” BEFORE
CONNECTION.
To household
mains socket
SC-HC29 DBEB.GN.GS RQT9869-1B EN.fm Page 4 Monday, March 17, 2014 2:31 PM