5
RQT9869
Overview of controls
Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.
AStandby/on switch [`], [1]
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still
consuming a small amount of power.
BSelect the audio source
On the remote control:
Press the corresponding button to select the source.
On the main unit:
1 For the United Kingdom and Ireland
2 For Australia and New Zealand
CBasic playback control
DView the setup menu
EView the content information
FSelect or confirm the option
GOpen or close the sliding door
HDecrease the brightness of the display panel
To cancel, press the button again.
IAdjust the volume level
JMute the sound
To cancel, press the button again.
“MUTE” is also cancelled when you adjust the volume
or when you switch off the system.
KView the play menu
LSelect the sound effects
MAUX IN terminal
NUSB port ( )
DC OUT terminal (Z“Charging a portable device”)
OSelect “BLUETOOTH” as the audio source
To start Bluetooth® pairing, press and hold the
button.
PNFC touch area
QSliding door
RDisplay panel
SRemote control sensor
Distance: Within approximately 7 m
Angle: Approximately 20° up and down, 30° left and
right
Top view
SC-HC29 DBEB.GN.GS RQT9869-1B EN.fm Page 5 Monday, March 17, 2014 2:31 PM