Making a recording, The RESET function, Pcm C.Focus

[INPUT SELECTOR, <, >]

For selecting input.

[VOLUME]

Volume control.

Making a recording

INPUT SELECTOR

MUSIC PORT

You can record to a unit connected to DVR/DVD-P OUT. You can record any analog source except DVR/DVD-P IN.

INPUT SELECTOR

VOLUME

[]

Headphone jack

Plug type: 3.5 mm (1/8") stereo

•Sound does not come from the speakers if you connect headphones.

•Avoid listening for prolonged periods of time to prevent hearing damage.

1.Press [INPUT SELECTOR < or >] to select the source to be recorded.

2.Begin recording.

Follow your recording unit's operating instructions.

3.Start the source to be recorded.

Note

This unit cannot record digital sources. Connect through the analog terminals and select "ANALOG" input (➡ page 18).

MENU TUNE

SETUP ENTER

MUSIC PORT

The operation settings for the unit will be initialized to the settings made at the time of shipment.

However, any preset radio stations will not be erased.

1.	Press and hold [―SETUP] to enter the setup
	menu.
2.	Press [TUNE - or +] to select "RESET" ➡ [ENTER].
3.	Press [TUNE +] to select "RESET YES"
	➡ [ENTER].
	To cancel, select "RESET NO".
	guide/Makingrecording/a ThefunctionRESET
	Control

[% DIGITAL, DTS, % PL ΙΙ]

Lights to indicate the source's input signal and decoding format used.

%DIGITAL: Dolby Digital sources DTS: DTS sources

%PL ΙΙ: Dolby Pro LogicΙΙ decoder is being used

[SFC, 2CH MIX]

SFC: Appears when you are using an SFC mode

2CH MIX: Appears when you are listening to a multi- channel source with headphones

Manufactured under license from Dolby Laboratories.	RQTV0105
“Dolby”, “Pro Logic” and the double-D symbol are trademarks
of Dolby Laboratories.
	13

“DTS” and “DTS Digital Surround” are registered trademarks
of Digital Theater Systems, Inc.