Specifications (IHF'78)
g AMPLIFIER SECTION
RMS output power of each channel driven
10 % total harmonic distortion |
|
|
1 kHz front CH | 90 | W per channel (4 Ω) |
1 kHz surround CH | 90 | W per channel (4 Ω) |
1 kHz center CH | 220 | W per channel (6 Ω) |
100 Hz subwoofer CH | 220 | W per channel (6 Ω) |
Total RMS output power |
| 800 W |
Rated minimum sine wave RMS power output |
| |
1% total harmonic distortion (Dolby Digital mode) | ||
150 Hz to 20 kHz front CH | 50 | W per channel (4 Ω) |
150 Hz to 20 kHz surround CH | 50 | W per channel (4 Ω) |
150 Hz to 20 kHz center CH | 150 | W per channel (6 Ω) |
45 Hz to 150 Hz subwoofer CH | 150 | W per channel (6 Ω) |
Total FTC output power |
| 400 W |
Rated minimum sine wave RMS power output |
| |
1% total harmonic distortion (Stereo mode) |
| |
150 Hz to 20 kHz front CH | 50 | W per channel (4 Ω) |
45 Hz to 150 Hz subwoofer CH | 150 | W per channel (6 Ω) |
Total FTC output power |
| 200 W |
Total harmonic distortion |
|
|
Half power at 1 kHz (Front CH) |
| 0.2 % (4 Ω) |
Input sensitivity |
|
|
| 450 mV, IHF'66 | |
MUSIC PORT |
| 250 mV, IHF'66 |
S/N (IHF A) |
|
|
70 dB (85 dB, IHF'66) | ||
Input impedance |
|
|
| 47 kΩ | |
Tone controls |
|
|
BASS |
| 50 Hz, +10 to |
TREBLE | 20 kHz, +10 to | |
|
|
|
Digital input OPTICAL |
| 2 |
COAXIAL |
| 1 |
|
|
|
g FM TUNER SECTION
Frequency range | 87.9 MHz to 107.9 MHz |
Sensitivity | 11.2 dBf (2 µV, IHF '58) |
50 dB quieting sensitivity |
|
MONO | 18.3 dBf (4.5 µV, IHF '58) |
STEREO | 38.3 dBf (45 µV, IHF '58) |
Total harmonic distortion |
|
MONO | 0.3% |
STEREO | 0.4% |
S/N |
|
MONO | 71 dB |
STEREO | 65 dB |
Frequency response | 20 Hz to 15 kHz, +1 dB, |
Image rejection at 98 MHz | 40 dB |
Stereo separation |
|
1 kHz | 40 dB |
Antenna terminal | 75 Ω (unbalanced) |
g AM TUNER SECTION |
|
Frequency range | 530 kHz to 1710 kHz |
g SPEAKER SECTION Front speaker (SB-PF40)
Type |
| 1 Way, 1 Speaker, |
Speaker unit |
|
|
Full range | 6.5 cm (2 1/2") cone type x 1, 4 Ω | |
Input power (IEC) |
| 90 W (Max) |
Output sound pressure level |
| 78 dB/W (1.0 m) |
Frequency range |
| 110 Hz to 23 kHz |
|
| 120 Hz to 21 kHz |
Dimensions (W x H x D) |
| 92 mm x 270 mm x 95.4 mm |
|
| (3 5/8" x 10 5/8" x 3 3/4") |
Mass |
| 0.8 kg (1.8 lb.) |
Surround speaker |
|
|
Type |
| 1 Way, 1 Speaker, |
Speaker unit |
|
|
Full range | 6.5 cm (2 1/2") cone type x 1, 4 Ω | |
Input power (IEC) |
| 90 W (Max) |
Output sound pressure level |
| 76 dB/W (1.0 m) |
Frequency range |
| 110 Hz to 22 kHz |
|
| 120 Hz to 21 kHz |
Dimensions (W x H x D) |
| 92 mm x 135 mm x 95.4 mm |
|
| (3 5/8" x 5 5/6" x 3 3/4") |
Mass |
| 0.6 kg (1.3 lb.) |
Center speaker |
|
|
Type |
| 1 Way, 2 Speakers, |
Speaker unit |
|
|
Full range | 6.5 cm (2 1/2") cone type x 2, 6 Ω | |
Input power (IEC) |
| 220 W (Max) |
Output sound pressure level |
| 82 dB/W (1.0 m) |
Frequency range |
| 110 Hz to 22 kHz |
|
| 120 Hz to 20 kHz |
Dimensions (W x H x D) |
| 270 mm x 92 mm x 95.4 mm |
|
| (10 5/8" x 3 5/8" x 3 3/4") |
Mass |
| 1.3 kg (2.9 lb.) |
Passive subwoofer |
|
|
Type |
| 1 Way, 1 Speaker, |
Speaker unit (Woofer) |
| 16 cm (6 1/2") cone type, 6 Ω |
Input power (IEC) |
| 220 W (Max) |
Output sound pressure level |
| 78 dB/W (1.0 m) |
Frequency range |
| 31 Hz to 500 Hz |
|
| 38 Hz to 400 Hz |
Dimensions (W x H x D) |
|
|
182 mm x 392 mm x 266 mm (7 3/16" x 15 7/16" x 10 1/2") | ||
Mass |
| 3.7 kg (8.2 lb.) |
g GENERAL |
|
|
Power supply |
| AC 120 V, 60 Hz |
Power consumption |
| 100 W |
Dimensions (W x H x D) |
|
|
430 mm x 105 mm x 385 mm (16 15/16" x 4 1/8" x 15 1/32") | ||
Mass |
| 3.8 kg (8.4 lb.) |
|
| |
Power consumption in standby mode: | 1 W | |
|
|
|
Notes:
1.Specifications are subject to change without notice. Mass and dimensions are approximate.
2.Total harmonic distortion is measured by the digital spectrum analyzer.
Specifications
RQTV0105
21
