Speaker installation options
∫ Attaching to a wall | ∫ Fitting speaker stands (not included) | |
You can attach all of the speakers to a wall. | Ensure the stands meet these conditions before purchasing them. | |
≥The wall or pillar on which the speakers are to be attached | Note the diameter and length of the screws and the distance | |
between screws as shown in the diagram. | ||
should be capable of supporting 10 kg (22 lbs) per screw. | ||
| ||
Consult a qualified building contractor when attaching the | ≥The stands must be able to support over 10 kg (22 lbs). | |
speakers to a wall. Improper attachment may result in damage to | ≥The stands must be stable even if the speakers are in a high | |
the wall and speakers. | position. |
1Drive a screw (not included) into the wall.
Simple Setup
| 30 to 35 mm |
| (13/16q to 13/8q) |
| ‰7.5 to 9.4 mm |
‰3.0 to 4.0 mm | (19/64q to 3/8q) |
(1/8q to 5/32q) |
|
| 4.0 to 7.0 mm |
Wall or pillar | (5/32q to 9/32q) |
|
e.g. Center speaker
Metal screw holes
For attaching to speaker stands
2 Fit the speaker securely onto the screw(s) with the hole(s). | 5 mm (3/16q), pitch 0.8 mm (1/32q) | ||
Front speaker | Surround speaker | Plate thickness plus |
|
|
|
| |
|
| 7 mm to 10 mm (plus |
|
|
| 9/32q to 13/32q) | 60 mm (23/8q) |
Speaker stand
(not included)
Center speaker
200mm
(77/8z)
e.g.
In this position, the |
|
|
| Move the speaker |
speaker will likely |
|
|
| so that the screw is |
fall if moved to the |
|
|
| in this position. |
left or right. |
|
|
|
|
Positioning the speakers
RQT8593
5