Panasonic SC-HT545W manual HT545W Avoiding interference, Attaching to a wall

8654En_p03-13.fmPage5Wednesday, April 12,200612:36PM
∫ [HT545W] Avoiding interference
To avoid possible int rferenc	do not ace the wireless system near any of the following devices.
The wireless system uses the same ra	io frequencies as other devices that may be present in your home.

e.g.

2.4GHz-band microwave oven

personal computer with 2.4GHz-band wireless LAN

2.4GHz-band cordless phone

The wireless system will automatically seek a clear channel if any of these other devices interfere with its communication. When this happens, the wireless link indicator (“ [W] ”) flashes on the main unit, and there is a brief interruption in audio coming from the surround speakers.

This is the normal operation of the product working to assure the best possible performance of your Home Theater System.

If the interference persists, try moving the other devices to another location outside the range of the wireless system.

Speaker installation options

Simple Setup

Positioning the speakers

∫Attaching to a wall

You can attach all of the speakers (except subwoofer) to a wall. ≥The wall or pillar on which the speakers are to be attached should

be capable of supporting over 10 kg per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.

1 Drive a screw (not included) into the wall.

‰4.0 mm	‰7.5 to 9.5 mm
Wall or pillar	5.0 to 7.0 mm

2Fit the speaker securely onto the screw(s) with the hole(s).

[HT545] Front speaker [HT545] Center speaker

∫Fitting speaker stands (not included)

Ensure the stands meet these conditions before purchasing them. Note the diameter and length of the screws and the distance between screws as shown in the diagram.

≥The stands must be able to support over 10 kg.

≥The stands must be stable even if the speakers are in a high position.

e.g. [HT545] Center speaker

Metal screw holes

For attaching to speaker stands

5 mm, pitch 0.8 mm
Plate thickness plus	60 mm	Speaker stand
7 mm to 10 mm		(not included)

200 mm

[HT545] Surround speaker	[HT545W] Center speaker
[HT545W] Front and surround
speakers

e.g. In this position, the

speaker will likely fall if moved to the left or right.

Move the speaker so that the screw is in this position.

RQT8654

5