Panasonic SC-HT545W manual Use, Preparing the remote control/Performing Quick Setup, Do not

Simple Setup

Preparing the remote control/Performing QUICK SETUP

HT545545WEn.bookPage10		Wednesday,April5,20069:41AM	≥attempt to recharge alkaline or manganese batteries.
STEP6	Preparing the remote control
			Do not:
Remote control		Batteries	≥mix old and new batteries.
			≥use different types at the same time.
			≥heat or expose to flame.
			≥take apart or short circuit.
2 Insert so the poles (i and j) match those in the remote control.			≥use batteries if the covering has been peeled off.
3			Mishandling of batteries can cause electrolyte leakage which can
			severely damage the remote control.
			Remove the batteries if the remote control is not going to be used for a
			long period of time. Store in a cool, dark place.
		1 ≥Do not use rechargeable type	∫ Use
		batteries.	Aim at the remote control signal sensor (➜ page 11), avoiding

R6/LR6, AA obstacles, at a maximum range of 7 m directly in front of the unit.

STEP7 Performing QUICK SETUP

The QUICK SETUP screen assists you to make necessary settings.

To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).

≥To change your television’s video input mode, refer to its operating instructions.

≥This remote control can perform some basic television operations (➜ page 31).

DVD	1	Turn on the unit.
	2	Select “DVD/CD”.
	3	Press and hold to show
		the QUICK SETUP
		screen.
ENTER	4	Select Follow the messages
RETURN
		and make the settings.
SETUP		Register

	5		Press to finish QUICK
		ENTER	SETUP.
	6		Press repeatedly to exit.
RQT8654
	To change these settings later

Select “QUICK SETUP” in the “Others” tab (➜ page 24).

10