Panasonic SC-HT60 Front and surround speaker assembly, Attaching the stand to the base

2 Front and surround speaker assembly			SC-HT60
Attaching the stand to the base
1 Thread the speaker cable		Secure the speaker stand to	3 Fasten the speaker cable to
	2
through the base.		the base.	the base.

Fasten screw

Fasten screws

Speaker setup Step 1

Attaching the speaker to the stand

Note

Before attaching, check the speaker label.

•SB-FS61:Use as front speakers. Attach the stands with the short cables.

•SB-FS62:Use as surround speakers. Attach the stands with the long cables.

1

Remove the cover from the bottom of the speaker and attach the speaker to the stand.

2

Secure the speaker to the speaker stand.

3

Connect the speaker cables.

Cover

Fasten screws

Thread speaker cable through slot

white

white with blue stripe

Press the speaker cable into the groove

screw eye

wall

Preventing the speakers from falling over

Attach screw eyes (not included) to secure the speakers to a wall (diagram on the left).

•Obtain the screws appropriate to the walls and pillars to which they are going to be fastened.

•Consult with a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

RQTV0110

5