Other speaker setup options
Fitting optional speaker stands SC-HT40
e.g. Front and surround speakers
5mm, Pitch 0.8 mm
• Use the same screw type for the center speaker.
• The stands must be able to support over 10 kg.
• The stands must be stable even if the speakers are in a high position.
setup Step 1
Attaching to a wall
Center speaker
SC-HT40
200 mm
Wall or pillar |
Ensure that the screws are securely positioned when attaching the speakers to the wall.
30 - 35 mm
7.5 -
9.4 mm
4 - 7 mm
3.0- 4.0 mm
Speaker
Front and surround speakers
Wall or pillar
Use new cables when attaching the speakers to the wall.
The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building contractor when attaching the speakers to wall. Improper attachment may result in damage to the wall and speakers.
1Secure the cover at the bottom of the speaker.
Fasten screws
2Press the speaker cable into the groove.
white white with blue stripe
3Fix screws at 335 mm
apart onto the wall.
335 mm
RQTV0110
7
