Simple Setup
Assembling the front and surround speakers
STEP1 Assembling the front and | The supplied stands are specially designed |
speakers or | |
| for attachment to Panasonic |
surround speakers | Use only as indicated in this setup. |
Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥For assembly, use a
≥Make sure you have all the indicated components before starting assembly, setup, and connection.
≥There is no difference between the right and left speakers and stands.
≥For optional wall mount, refer to page 8.
[Note]
≥The front and surround speakers are different.
–Check the label on the rear of speaker before attaching the stand (➜ page 9).
–The stand with shorter cable is for the front speaker.
2 Front speakers and | 4 Stands | 4 Bases | 16 Screws | ||
2 Surround speakers | ≥2kstands with short cable: |
|
|
| |
(with cover plate) | For front speakers |
|
|
| |
| ≥2kstands with long cable: |
|
|
| |
| For surround speakers |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 Attach the stand to the base. | 2 Secure the stand to the base. | |
1 Thread the speaker cable through the base. | Screw | |
For quicker threading, loosely fold the cable in half (do not | Tighten securely. | |
crease), pass the folded portion through the hole, and then pull | ||
| ||
the rest of the cable through the base. |
| |
Cable | Stand | |
| ||
| Base | |
Base | Slide the speaker | |
| cable into the groove. | |
| Screws | |
2 Attach the stand to the base while gently pulling on the | Tighten securely. | |
end of the speaker cable. |
|
3 Attach the speaker to the stand.
Stand
Base
Cable
Pull gently.
1Pull out the end of the speaker cable and position it between the ridges.
Ridges
Cable
Stand
2Attach the speaker to the stand.
Cover plate
Speaker | Remove before attaching |
the speaker and keep for
RQT8720
Stand
6