12 RQT9777
Connect the speaker cables.
§ If you have difficulty inserting the cable, try straightening the speaker cable and then bending the
cable about 20 mm (25/32q) from the tip, at an angle of approx. 45o (as illustrated above).
Drive a screw into the wall.
≥Use the measurements indicated below to identify the screwing positions on the wall.
≥Leave at least 20 mm (25/32q) of space above and on each side of the speaker to allow enough space for fitting the speaker.
≥Keep the screws out of reach of children to prevent swallowing.
1Insert the wire fully.
r: White
s: Blue line
≥Insert the wire fully, taking
care not to insert beyond
the wire insulation.
2Press into the groove.
ARight speaker
connector
BLeft speaker connector
AAt least 30 mm (1 3/16q)
B‰4.0 mm (5/32q)
C‰7.0 mm to ‰9.4 mm (9/32q to 3/8q)
DWall or pillar
E5.5 mm to 6.5 mm (7/32q to 1/4q)
F238 mm (9 3/8q)G576 mm (22 11/16q)H248 mm (9 3/4q)I20 mm (25/32q)
JWall mounting hole
45
Push
Red White
Front view (semi-transparent image)
SC-HTB370PPC_RQT9777-1P_mst.book Page 12 Tuesday, January 29, 2013 11:48 AM