Getting started
RQT9777 15
Drive a screw into the wall.
Fit the speaker(s) securely onto the screw(s).
≥Use the measurements indicated below to identify the
screwing positions on the wall.
≥Leave at least 20 mm (25/32q) of space above and on each
side of the speaker to allow enough space for fitting the
speaker.
≥Keep the screws out of reach of children to prevent
swallowing.
A
At least 30 mm (1
3
/
16
q
)
B‰4.0 mm (5/32q)
C‰7.0 mm to ‰9.4 mm (9/32q to 3/8q)
DWall or pillar
E5.5 mm to 6.5 mm (7/32q to 1/4q)
FFront speaker
(Rear view)
G100 mm (3 15/16q)
H436 mm (17 5/32q)
I34 mm (1 11/32q)
JWall mounting hole
Red connector: The speaker attached to the red connector cable is to be placed on the right side.
White connector: The speaker attached to the white connector cable is to be placed on the left side.
KLeft speaker connector LRight speaker connector
DO DO NOT
≥Move the speaker so
that the screw is in this
position.
≥In this position, the
speaker will likely fall if
moved to the left or
right.
Red
White
SC-HTB370PPC_RQT9777-1P_mst.book Page 15 Tuesday, January 29, 2013 11:48 AM