16 RQT9777
≥For a safety measure to prevent the speakers from falling, refer to page 20.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following steps 1 and 2 of “Place the speakers
horizontally” (>11, 12).
Attach the leg stands.
≥Keep the screws out of reach of children to prevent swallowing.
When placing the speakers on a table
Place the speakers using the leg stands
∏2 Speakers ∏2 Speaker cables
WHITE: Left
RED: Right
∏1 Metal bracket
∏2 Leg stands ∏4 Screws
Red connector: With the speaker facing down, the speaker attached to the red connector cable is
to be placed on the left side.
White connector: With the speaker facing down, the speaker attached to the white connector cable is
to be placed on the right side.
AScrew (supplied)
≥Tighten securely.
BScrew hole
CRight speaker connector
DLeft speaker connector
Align the higher or lower holes with the projecting parts on the
speaker.
≥By changing the position that the stand is attached to the
projecting parts, the height can be adjusted by 9 mm (11/32q).
Red
White
SC-HTB370PPC_RQT9777-1P_mst.book Page 16 Tuesday, January 29, 2013 11:48 AM