∫If the TV’s remote control sensor is
blocked by this unit.
Try using the TV’s remote control from a different angle. If the problem persists, you can use the supplied IR Blaster to relay the signal to the TV. (> 21)
≥Do not use the IR Blaster if the TV’s remote control sensor is not blocked by this unit.
∫If irregular colouring occurs on your TV, turn the TV off for about
30 minutes.
If it persists, move this unit further away from the TV.
The Active subwoofer
Place to the right or left of the TV, on the floor or on a sturdy shelf so that it will not cause vibration. Leave about 30 cm from the TV.
To avoid interference, maintain the following distances between the active subwoofer and other electronic devices that use the same radio frequency (2.4 GHz band).
A 
B
C
AActive subwoofer
BWireless LAN: approx. 2 m
CCordless phone and other electronic devices: approx. 2 m
The active subwoofer will automatically seek a clear channel if any of these other devices interfere with its communication.
When this happens there is a brief interruption to the audio coming from the subwoofer.
This is the normal operation of the product working to assure the best possible performance of your home theater audio system.
If the interference persists, try moving the other devices to another location outside the range of the active subwoofer or move the active subwoofer nearer to this unit.
≥Place the active subwoofer within approximately 10 m of this unit, and in a horizontal position with the top panel faced upward.
≥To allow for proper ventilation and to maintain good airflow around the active subwoofer, position it with at least 5 cm of space on all sides.
≥Do not use the active subwoofer or this unit in a metal cabinet or bookshelf.
Operating Instructions
9
