Panasonic SC-HTB500 operating instructions Remote control, To replace a button-type battery

Remote control

1	4
2	5
	6

3 7 8

1Turn this unit on or off (> 14)

2Select the source (> 14) [TV]:

Select the TV as the source [BD/DVD]:

Select the device connected to the HDMI AV IN terminal as the source

3Turn Clear-mode Dialog on or off (> 15)

4Adjust the Subwoofer level of the active subwoofer

5Adjust the Volume of this unit

6Mute the sound

7Turn Dolby Virtual Speaker on or off (> 15)

8Turn Sound Effect on or off (> 15)

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

Remove the insulation sheet A before using.

∫To replace a button-type battery

1While pressing the stopper B, pull out the

battery holder.

2Set the button-type battery with its (i) mark facing upward and then put the battery holder back in place.

≥When the button-type battery runs down, replace it with a new battery (part number: CR2025). The battery should normally last about 1 year, however this depends on how frequently the unit is used.

≥Do not heat or expose to flame.

≥Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.

Warning

Keep the Button-Type battery out of the reach of children. Never put Button-Type battery in mouth. If swallowed call your doctor.

Operating Instructions

7