1 Use the measurements indicated below to identify the screwing positions on the wall.

≥Position the unit with at least 50 mm (2q) of space above the unit. If not, it may not be possible to access the buttons on this unit.

 

1018 mm (3911/16)

 

 

257 mm (101/8)

252 mm (929/32) 233.5 mm (913/64)

275.5 mm (1013/16)

 

 

 

 

 

 

31.5 mm (115/64)

75 mm

 

 

 

 

 

 

 

 

 

 

43.5 mm (145/64)

(215/16)



 

12.5 mm (31/64)

 

AWall mount bracket

2 Attach the wall mount brackets to the wall.

≥The position in the wall where the screw is to be attached as well as the screw should be capable of supporting over 33 kg (72.8 lbs).

≥Be sure to use a spirit level to ensure that both screwing positions are horizontal to each other.

≥Keep the screws out of reach of children to prevent swallowing.

≥Keep the wall mount brackets out of reach of children to prevent swallowing.

Precautions

BWall mount bracket (supplied) C Screws (not supplied)

 

 

 

 

 

 

 

 

 

 

 

 

 

A

At least 30 mm

 

 

 

 

 

 

 

 

 

 

 

 

(13/16q)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

‰4.0 mm (5/32q)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

‰7.5 mm to

 

 

 

 

 

 

 

 

 

 

 

 

 

‰9.4 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

(19/64q to 3/8q)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D

Wall

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

E

Wall mount bracket

3 Complete all the necessary connections to this unit. (> 15 to 17)

≥Connect the AC power supply cord to this unit, but do not connect it to the household AC outlet until the installation is completed.

4 Attach the rear pads to the rear of the unit.

≥Keep the rear pads out of reach of children to prevent swallowing.

DRear pads (supplied)

5 Attach a cord (not supplied) to 2 safety holders.

≥Use a cord which is capable of supporting over 33 kg (72.8 lbs).

≥Keep the safety holders out of reach of children to prevent swallowing.

E Safety holder (supplied)

F Cord (not supplied)

 

G Thread a cord through the holes.

 

 

 

Refer to the Owner’s Manual of the cord

 

 

for details.

Getting started

11