Using LP mode
This mode minimizes power consumption of the battery by lowering the speaker output. (> 8)
Press and hold [LP] for 2 seconds or more until the LP mode indicator (green) lights up.
The LP mode is enabled.
• Press and hold [LP] for 2 seconds or more again will return the setting back to the normal mode.
Note
•Even when the AC adaptor is connected, LP mode remains enabled.
•In LP mode, even when the volume knob is adjusted, the volume of the unit may not increase.
•Turning off the LP mode may cause the volume to jump up suddenly. Before turning off the LP mode, lower the volume.
Using the AUX input
You can listen to audio via the AUX IN jack (> 6, 7) when this unit is connected to a device with an audio cable
Note
•When using the AUX input, AUX input has priority than the Bluetooth® features and NFC features.
(It will be possible to receive a call 
] when there is a call coming in on the device connected with Bluetooth®. > 14)
•The setting of the Bluetooth® is not changed even if the audio cable
•When using the AUX input, the volume may seem low depending on the connected device. In that case, check if the volume limit can be changed on the device. For details, refer to the manual of the device.
•If an audio cable
Auto Power Off
This unit automatically turns off if there is no audio input and no operation is performed for approximately 10 minutes.
Note
•If the AUX IN jack is in use while the AC adaptor is connected, this function will not work.
•This function may operate even when the music is being played back if the volume of the connected device is low.
•This function may not operate depending on the connected device.
•When the DC OUT terminal is in use, this function will not work.
[NA30]
•The Auto Power Off function is activated, the retractable panel will remain lowered when the unit is turned off. To leave the retractable panel raised when the unit is turned off, press [Í/I] twice.
VQT5C36
13
