Panasonic SC-NS55 Timer, Setting the clock, Using the play timer, Using the sleep timer

Timer

Setting the clock

This is a 12-hour clock.

1 Press [CLOCK/TIMER] to select “CLOCK”.

Each time you press the button:

CLOCK ˚ PLAY

Original display

2 Within 5 seconds, press [/4] or [/¢] to set the time.

3 Press [CLOCK/TIMER] again to confirm.

Displaying the clock

Press [CLOCK/TIMER] to display the clock for few seconds.

Note

The clock may lose or gain minutes over a period of time. Readjust as necessary.

Using the play timer

You can set the play timer to come on at a certain time to wake you up.

Preparation

Turn the unit on and set the clock.

Prepare the music source you want to listen to; disc, radio, option port or music port source, and set the volume.

1	Press [CLOCK/TIMER] repeatedly to select play
	timer.
	CLOCK	˚ PLAY
	Original display
2	Within 5 seconds, press [	/4] or [ /¢] to set the
	starting time.

Start time

		Play timer indicator
3	Press [CLOCK/TIMER] to confirm.
4	Repeat steps 2 and 3 to set the finishing time.
		Finish time

Using the sleep timer

This function enables you to turn off the unit automatically after the set time.

Press [SLEEP] repeatedly to select your desired time.

Sleep timer indicator

To cancel

Press [SLEEP] to select “OFF”.

Changing the remaining time

Press [SLEEP] to show the remaining time, and press [SLEEP] again to select your desired time.

Note

•The play and sleep timer can be used together.

•The sleep timer always has priority. Be sure not to overlap timer settings.

To activate the timer

5	Press [˚PLAY] to turn on the timer.
	“˚PLAY” is displayed.
6	Press [y] to turn off the unit.
	The unit must be off for the timer to operate.

To	Action
change the settings	Repeat steps 1 to 4 and 6.
change the source	1)	Press [˚PLAY] to clear the ˚PLAY
or volume		indicator from the display.
	2)	Make changes to the source or volume.
	3)	Perform steps 5 and 6.
check the settings	Press [CLOCK/TIMER] repeatedly to select
(when the unit is on	˚PLAY.
or in standby mode)
cancel	Press [˚PLAY] to clear the timer indicator
	from the display.

Note

•The timer will start at the preset time, with the volume increasing gradually to the preset level.

•The timer comes on at the set time every day if the timer is on.

•The unit must be in the standby mode for the timer to function.

•If you turn the unit off and on again while a timer is functioning, the fi nish time setting will not be activated.

•Regardless of the channel selection during timer setting, the XM satellite radio always comes on with the previous selected channel.

•If MUSIC PORT or OPTION PORT is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT or OPTION PORT as the source. If you wish to playback from the portable audio equipment, activate the equipment’s play mode and increase the volume. (See the portable audio equipment’s instruction manual.)

RQTV0183

13