Panasonic SC-NS55 important safety instructions Sound adjustment, External unit

Sound adjustment

Numeric

buttons

Selecting sound effects

You can change the sound effect by selecting Preset EQ or adjusting the bass or treble effect.

Preset EQ

Press [PRESET EQ] repeatedly to select your desired setting.

HEAVY → CLEAR → SOFT → VOCAL → EQ-OFF

Setting	Effect
HEAVY	Adds punch to rock
CLEAR	Clarifi es higher frequencies
SOFT	For background music
VOCAL	Adds gloss to vocal
EQ-OFF	No effect

Bass or treble

Enable you to enjoy the lower or higher pitch sound.

1	Press [BASS/TREBLE] repeatedly to select your
	desired setting.
			BASS		TREBLE
				original display
	Setting	Effect
	BASS	For lower pitch sound
	TREBLE	For higher pitch sound
2
	Press [5] or [∞] to adjust the level.

Note

The tone level can be varied within -4 to +4.

Enjoying surround sound

Enable you to add natural width and depth to the stereo sound.

To activate

Press [SURROUND] to display “ ” indicator.

To cancel

RQTV0183	Press [SURROUND] again to clear “	” indicator.
	Note
	• Surround sound is less discernible when listening through
	headphones.
14
	• If interference in FM stereo reception	increases, cancel the
	surround sound effect.

External unit

Connecting to a portable audio equipment

This feature enables you to enjoy music from portable audio equipment.

Audio cord (not included)

Portable audio equipment (not included)

Playing from portable audio equipment

Switch off the equalizer function (if there is any) of the portable audio equipment before you plug into the MUSIC PORT jack. Otherwise, sound from the speaker may be distorted.

1	Plug the audio cord into the MUSIC PORT jack and
	press [MUSIC PORT].
2	Play the portable audio equipment. (See the
	portable audio equipment’s instruction manual.)

Note

All peripheral components and cables are sold separately.

Changing the remote control code

Change the code if you fi nd the remote control unintentionally also controls other equipments.

Change the main unit’s code

Press and hold [MUSIC PORT] on the main unit and then press and hold [2] (or [1]) on the remote control. “REMOTE 2” is displayed.

Change the remote control’s code

Press and hold [ENTER] and [2] (or [1]) on the remote control for at least 2 second.

If the remote control and main unit are using different codes, a message appears on the main unit’s display showing the main unit’s current code. Follow the above step to change the remote control’s code to match it.