Panasonic SC-PM31 Timer, Setting the clock, Using the sleep timer, Using the play or record timer

Timer

Setting the clock

This is a 12-hour clock.

1 Press [CLOCK/TIMER] to select “CLOCK”.

Each time you press the button:
CLOCK	˚ PLAY	˚ REC
	Original display

2 Within 5 seconds, press [4/REW/ 4 ] or [3/FF/¢] to set the time.

3 Press [CLOCK/TIMER] again to confirm.

Displaying the clock

Press [CLOCK/TIMER] to display the clock for few seconds.

•The clock may lose or gain some time over a period. Readjust if necessary.

Using the sleep timer

This function enables you to turn off the unit automatically after the set time.

Press [SLEEP] to select your desired time.

SLEEP 30 SLEEP 60 SLEEP 90

SLEEP OFF SLEEP 120

Sleep timer indicator

To cancel

Press [SLEEP] to select “SLEEP OFF”.

Changing the remaining time

Press [SLEEP] to show the time and press [SLEEP] again to select your desired time.

• The play and sleep timer or the record and sleep timer can be used together.

12 • The sleep timer always has priority. Be sure not to overlap timer RQT7923 settings.

Using the play or record timer

You can set the timer to come on at a certain time to wake you up (play timer) or to record from the radio or an aux source (record timer).

Turn the unit on and set the clock.

Timer	Action
Play timer	Prepare the music source you want to listen to;
	tape, CD number (1~5), radio or AUX, and set the
	volume.
Record timer	Check the cassette’s erasure prevention tabs
	(refer page 10), insert the cassette and tune to
	the radio station (refer page 11) or select the aux
	source (refer page 13).

1	Press [CLOCK/TIMER] to select your desired timer.
	Each time you press the button:
	CLOCK	˚ PLAY	˚ REC
		Original display
2	Within 5 seconds, press [4/REW/ 4 ] or [3/FF/¢]
	to set the starting time.

Start time

Play timer indicatorRecord timer indicator

3	Press [CLOCK/TIMER] to confirm.
4	Repeat steps 2 to 3 to set the finishing time.
	Finish time

To activate the timer
5	Press [˚PLAY/REC] to turn on your desired timer.
6		˚ PLAY	˚ REC	no display (off)
	Press [y] to turn off the unit.

The unit must be off for the timers to operate.

To enjoy the desired source after the timer setting is completed.

The volume level (for play timer) and music source are stored in the timer memory and the timer will start in these preset conditions. However, the CD numbers do not get stored in the timer memory.

1.After step 5, start playing the desired source.

2.Reset the CD numbers if you have changed any of them, confi rm that a CD or cassette is inserted, then press [y] to put the unit on standby.

Other basic operations

To	Action
change the settings	Repeat steps 1 to 4 and 6 above.
change the source	1) Press [˚PLAY/REC] to clear the timer
or volume	indicator from the display.
	2) Make changes to the source or
	volume.
	3) Do steps 5 to 6 as above.
check the settings	Press [CLOCK/TIMER] repeatedly to
(when the unit is on	select ˚PLAY or ˚REC.
or in standby mode)
cancel	Press [˚PLAY/REC] to clear the timer
	indicators from the display.