Panasonic SC-PM31 Advanced CDs and MP3 functions, Checking which CDs are in the trays CD CHECK

Press [CD 6] and then [CLEAR 7].

Press [PROGRAM]. Press [DISC].

CD-DA MP3

CDs and MP3 – Play (Continued)

Checking which CDs are in the trays

(CD CHECK)

1 Press [CD CHECK].

CD CHECK

2 Press the button again to close the trays.

•The tray with a CD being played will not open.

•If the player is stopped, all trays will open.

•Do not remove or insert CDs during CD check.

•Do not pull out the trays during CD check.

•8 cm CDs cannot be checked.

CD display

This function allows you to display the information on the current track.

Press [DISPLAY] repeatedly during play or pause mode.

CD-DA

Remaining play time Elapsed play time

MP3

Elapsed time Remaining play time Album name ID3 (Artist) ID3 (Track) ID3 (Album) Track name

•Maximum number of displayable characters: approximate 30

•This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not supported will not be displayed.

•ID3 is a tag embedded in MP3 track to provide information about the track.

Advanced CDs and MP3 functions

Direct access play

This function allows you to start play from a specifi c track.

CD-DA

Press the numeric buttons to select and play your desired track.

	MP3
1	Press [ALBUM or ] to select the album.
2	Press [3/FF/¢] once and then the numeric buttons
	to select and play your desired track.

For two-digit track, press [h10] once then the two digits. For three-digit track, press [h10] twice then the three digits.

• This function does not work during any random/program mode.

Repeat play CD-DA MP3

You can repeat program play or other selected play mode.

Press [REPEAT] before or during play.

“REPEAT ON” and “ ” are displayed.

To cancel

Press [REPEAT] again.

“REPEAT OFF” is displayed and “ ” is cleared.

8

Marking a track CD-DA MP3

Enable you to mark one track for each loaded disc so that you can directly play the track later.

During play, press and hold the [MARKER] until “STORING” blinks on the display to mark your favorite track.

Press [MARKER] during play or stop mode to recall and play a marked track.

•The marker memory is cleared when you open the CD tray.

•This function does not work during any random/program mode.

Program play

This function allows you to program up to 24 tracks.

CD-DA

1

2

3

4 (Within 10 seconds or so)

Press [1]~[5] to select your desired disc.

5 Press the numeric buttons to select your desired track.

Example:

 Program number

		Program play Track number
		indicator
6	Repeat steps 3 to 5 to program other tracks.
7	Press [CD 6] to start play.
	MP3
1	Press [CD 6] and then [CLEAR 7].
2	Press [DISC].
3	(Within 10 seconds or so)
	Press [1]~[5] to select your desired disc.
4	Press [CLEAR 7].
5	Press [PROGRAM].
6	Press [ALBUM or	] to select your desired
	album.
7	Press [3/FF/¢] once and then the numeric buttons
	to select your desired track.
	Example:
		Album number

Track number

8 Press [ENTER].

Repeat steps 6 to 8 to program other tracks.

9 Press [CD 6] to start play.

RQT7923