Step 2 - Inserting batteries into the remote control





!! !2 ,2





Step 3 - DEMO function

Batteries

Insert so the poles (+ and –) match those in the remote control.

Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

Do not use rechargeable type batteries.

Mishandling of batteries can cause electrolyte leakage which can damage items the fl uid contacts and may cause a fi re.

Do not:

mix old and new batteries.

use different types at the same time.

heat or expose to fl ame.

take apart or short circuit.

attempt to recharge alkaline or manganese batteries.

use batteries if the covering has been peeled off.

Use

Aim at the remote control sensor, avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit.

Refer to page 6 for the remote control sensor position.

When the unit is fi rst plugged in, a demonstration of its functions may be shown on the display.

If the demo setting is off, you can show a demonstration by selecting “DEMO ON”.

Press and hold [STOP 7, –DEMO].

The display change each time the button is held down.

DEMO OFF DEMO ON

While in standby mode, select “DEMO OFF” to reduce power consumption.

Placement of speakers

Speakers are designed identically so that no left or right channel orientation is necessary.

These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily infl uenced by magnetism.

To avoid damage to the speakers, do not touch the speaker cones if you have taken the nets off.

Note

• Keep your speakers at least 10mm (13/32˝)away from the system for proper ventilation.

Use only the supplied speakers.

The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected.

Caution

Use the speakers only with the recommended system. Failure to do so can damage the amplifier and speakers, and can cause fire. Consult a qualified service person if damage occurs or if a sudden change in performance is apparent.

Do not attach these speakers to walls or ceilings.

5

RQT8038

Page 5
Image 5
Panasonic SC-PM41 important safety instructions Inserting batteries into the remote control, Placement of speakers