| A |
|
|
| B | R6, AA, | |
Beforeuse | C |
|
|
|
|
| |
|
| 2 | (L) |
|
| 1 |
|
|
| (R) |
|
|
| 3 | 4 |
To household mains socket
1 |
| |
Adhesive |
| |
tape |
| |
| AM | |
FM indoor | ANT | |
EXT | ||
antenna | ||
LOOP | ||
| ||
| FM ANT | |
4 | 75 | |
| ||
RQT7360 |
|
AThe remote control
■Batteries
•Insert so the poles (+ and
•Do not use rechargeable type batteries.
Do not:
•mix old and new batteries.
•use different types at the same time.
•heat or expose to flame.
•take apart or short circuit.
•attempt to recharge alkaline or manganese batteries.
•use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.
■Use
Aim at the remote control sensor, avoiding obstacles, at a max- imum range of 7 m (23 feet) directly in front of the unit.
Refer to page 6 for the remote control sensor position.
BPlacement of speakers
Speakers are designed identically so that no left or right chan- nel orientation is necessary.
Notes
•Keep your speakers at least 10 mm away from the system for proper ventilation.
•These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism.
•To avoid damage to the speakers, do not touch the speaker cones if you have taken the nets off.
CConnections
Plug the AC mains lead into a household mains socket only after all other connections have been made.
•To prepare the AM loop antenna wire and speaker cords, twist the vinyl cover tip and pull off.
1 Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position where radio signals are received with the least amount of interfer- ence.
Note
For the best reception:
An FM outdoor antenna is recommended. (\ page 5)
(Continued on next page)