AUDIO menu

Select to suit the type of equipment you connected to the HDMI AV OUT terminal.

Select “BITSTREAM” when the equipment can decode the bitstream (digital form of 5.1-channel data). Otherwise, select “PCM”.

(If the bitstream is output to the equipment without a decoder, high levels of noise can be output and may damage your speakers and hearing.)

DOLBY DIGITAL§

≥BITSTREAM ≥PCM

DTS§

≥BITSTREAM ≥PCM

§When audio is output from HDMI AV OUT terminal, and the connected equipment does not support the item selected, the actual output will depend on the performance of this connected equipment.

DYNAMIC RANGE

≥ON: Adjusts for clarity even when the volume is low. Convenient for late night viewing. (Only works with Dolby Digital)

≥OFF

SPEAKER SETTINGS

Select the delay time of the speakers. (Center and surround speakers only)

For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position.

If you have to place the center or surround speakers closer to the seating position, adjust the delay time to make up for the difference.

C : Actual speaker position

L

C

R

SW

 

: Ideal speaker position

 : Primary listening

 

 

 

distance

LSRS

Approximate room dimensions

LSRS

Circle of constant primary listening distance

If either distance a or b is less than c, find the difference in the table and change to the recommended setting.

a Center speaker

 

b Surround speaker

Difference (Approx.)

Setting

Difference (Approx.)

Setting

30 cm (1 foot)

 

1ms

150 cm (5 feet)

5ms

60 cm (2 feet)

 

2ms

300 cm (10 feet)

10ms

90 cm (3 feet)

 

3ms

450 cm (15 feet)

15ms

120 cm (4 feet)

 

4ms

 

 

150 cm (5 feet)

 

5ms

 

 

≥SETTINGS:

≥C DELAY (Center Delay):

0ms, 1ms, 2ms, 3ms, 4ms, 5ms

Select the delay time for your center speaker.

≥LS/RS DELAY (Left Surround/Right Surround Delay): 0ms, 5ms, 10ms, 15ms

Select the delay time for your surround speakers.

≥TEST TONE: SETTING

Use the test tone for speaker level adjustments (B 10, Adjusting the speaker output level manually).

AUDIO OUT

≥ON: When audio output is from the HDMI AV OUT terminal. (Depending on the capabilities of the connected equipment, audio output may differ from the audio settings of the main unit.)

≥OFF: When audio output is not from the HDMI AV OUT terminal. (The audio is output using the settings of the main unit.)

RGB RANGE

This works only when “COLOR SPACE” in Menu 4 (HDMI) is set to RGB (B 13).

≥STANDARD

≥ENHANCED: When the black and white images are not distinct.

VIERA Link

≥ON: The VIERA Link “HDAVI Control” function is available (B 14).

≥OFF

POWER OFF LINK

Select the desired power off link setting of this unit for VIERA Link operation (B 14). (This works depending on the settings of the connected VIERA Link “HDAVI Control” compatible equipment.)

≥VIDEO/AUDIO: When the TV is turned off, this unit will turn off automatically.

≥VIDEO: When the TV is turned off, this unit will turn off except during the following conditions:

–audio playback ([CD] [MP3] [WMA])

–iPod mode

–radio mode

–“AUX”, “ARC” or “D-IN” mode (non-selected TV audio setting for VIERA Link)

TV AUDIO

Select the TV audio input to work with the VIERA Link operations (B 14).

≥AUX

≥ARC

≥DIGITAL IN

OTHERS menu

SLIDE SHOW TIME

Set the speed of the slideshow.

Factory preset: 3 SEC

≥1 SEC to 15 SEC (in 1-unit steps)

≥15 SEC to 60 SEC (in 5-unit steps)

≥60 SEC to 180 SEC (in 30-unit steps)

FL DIMMER

Change the brightness of the unit’s display.

≥BRIGHT

≥DIM:

The display is dimmed.

≥AUTO:

The display is dimmed, but brightens when you perform

 

some operations.

FL CONTROL

≥ON (VOL 0): The unit’s display will turn off when the volume is adjusted to “0”.

≥OFF

Getting Started

Playing Discs

Other Operations

Reference

DISPLAY menu

LANGUAGE

Choose the language for the on-screen messages.

≥ENGLISH ≥FRANÇAIS ≥ESPAÑOL

HDMI menu

VIDEO PRIORITY

≥ON: When using the HDMI AV OUT terminal for video output. The resolution of the video output from the HDMI AV OUT terminal is optimized according to the capability of the connected equipment (e.g. TV).

≥OFF: When not using the HDMI AV OUT terminal for video output.

EASY SETUP

≥SET (B 8)

DVD-VR/DATA

Select to play only DVD-VR or DATA format.

≥DVD-VR: To play the video programs on DVD-R/-RW.

≥DATA: To play the data files on DVD-R/-RW.

SCREEN DIMMER

This is to prevent burn marks on the TV screen.

≥OFF

 

≥WAIT 5 MIN: If there is no operation for 5 minutes, the picture turns

RQTX1101

playback.)

gray. The TV screen will resume when you perform some

 

operations. (This does not work during video and picture

 

17